Diff: targets/hal/TARGET_STM/TARGET_NUCLEO_F072RB/i2c_api.c

Revision:

402:09075a3b15e3

Parent:

305:1f0269907d8b

Child:

404:cbc7dfcb0ce9

--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F072RB/i2c_api.c	Fri Nov 14 08:45:06 2014 +0000
+++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F072RB/i2c_api.c	Fri Nov 14 09:00:07 2014 +0000
@@ -62,7 +62,8 @@
 int i2c1_inited = 0;
 int i2c2_inited = 0;
 
-void i2c_init(i2c_t *obj, PinName sda, PinName scl) {
+void i2c_init(i2c_t *obj, PinName sda, PinName scl)
+{
     // Determine the I2C to use
     I2CName i2c_sda = (I2CName)pinmap_peripheral(sda, PinMap_I2C_SDA);
     I2CName i2c_scl = (I2CName)pinmap_peripheral(scl, PinMap_I2C_SCL);
@@ -71,7 +72,7 @@
     MBED_ASSERT(obj->i2c != (I2CName)NC);
 
     // Enable I2C1 clock and pinout if not done
-    if ((obj->i2c == I2C_1)&& !i2c1_inited) {
+    if ((obj->i2c == I2C_1) && !i2c1_inited) {
         i2c1_inited = 1;
         __HAL_RCC_I2C1_CONFIG(RCC_I2C1CLKSOURCE_SYSCLK);
         __I2C1_CLK_ENABLE();
@@ -82,14 +83,14 @@
         pin_mode(scl, OpenDrain);
     }
     // Enable I2C2 clock and pinout if not done
-    if ((obj->i2c == I2C_2)&& !i2c2_inited) {
+    if ((obj->i2c == I2C_2) && !i2c2_inited) {
         i2c2_inited = 1;
         __I2C2_CLK_ENABLE();
-    // Configure I2C pins
-    pinmap_pinout(sda, PinMap_I2C_SDA);
-    pinmap_pinout(scl, PinMap_I2C_SCL);
-    pin_mode(sda, OpenDrain);
-    pin_mode(scl, OpenDrain);
+        // Configure I2C pins
+        pinmap_pinout(sda, PinMap_I2C_SDA);
+        pinmap_pinout(scl, PinMap_I2C_SCL);
+        pin_mode(sda, OpenDrain);
+        pin_mode(scl, OpenDrain);
     }
 
     // Reset to clear pending flags if any
@@ -99,14 +100,15 @@
     i2c_frequency(obj, 100000); // 100 kHz per default
 }
 
-void i2c_frequency(i2c_t *obj, int hz) {
+void i2c_frequency(i2c_t *obj, int hz)
+{
     MBED_ASSERT((hz == 100000) || (hz == 400000) || (hz == 1000000));
     I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
     int timeout;
 
     // wait before init
     timeout = LONG_TIMEOUT;
-    while((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY)) && (timeout-- != 0));
+    while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY)) && (timeout-- != 0));
 
     // Common settings: I2C clock = 48 MHz, Analog filter = ON, Digital filter coefficient = 0
     switch (hz) {
@@ -134,7 +136,8 @@
     HAL_I2C_Init(&I2cHandle);
 }
 
-inline int i2c_start(i2c_t *obj) {
+inline int i2c_start(i2c_t *obj)
+{
     I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
     int timeout;
 
@@ -157,7 +160,8 @@
     return 0;
 }
 
-inline int i2c_stop(i2c_t *obj) {
+inline int i2c_stop(i2c_t *obj)
+{
     I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
 
     // Generate the STOP condition
@@ -166,7 +170,8 @@
     return 0;
 }
 
-int i2c_read(i2c_t *obj, int address, char *data, int length, int stop) {
+int i2c_read(i2c_t *obj, int address, char *data, int length, int stop)
+{
     I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
     I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
     int timeout;
@@ -211,7 +216,8 @@
     return length;
 }
 
-int i2c_write(i2c_t *obj, int address, const char *data, int length, int stop) {
+int i2c_write(i2c_t *obj, int address, const char *data, int length, int stop)
+{
     I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
     I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
     int timeout;
@@ -255,7 +261,8 @@
     return count;
 }
 
-int i2c_byte_read(i2c_t *obj, int last) {
+int i2c_byte_read(i2c_t *obj, int last)
+{
     I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
     int timeout;
 
@@ -270,7 +277,8 @@
     return (int)i2c->RXDR;
 }
 
-int i2c_byte_write(i2c_t *obj, int data) {
+int i2c_byte_write(i2c_t *obj, int data)
+{
     I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
     int timeout;
 
@@ -287,12 +295,13 @@
     return 1;
 }
 
-void i2c_reset(i2c_t *obj) {
+void i2c_reset(i2c_t *obj)
+{
     int timeout;
-	
+
     // wait before reset
     timeout = LONG_TIMEOUT;
-    while((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY)) && (timeout-- != 0));
+    while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY)) && (timeout-- != 0));
 
     if (obj->i2c == I2C_1) {
         __I2C1_FORCE_RESET();
@@ -306,7 +315,8 @@
 
 #if DEVICE_I2CSLAVE
 
-void i2c_slave_address(i2c_t *obj, int idx, uint32_t address, uint32_t mask) {
+void i2c_slave_address(i2c_t *obj, int idx, uint32_t address, uint32_t mask)
+{
     I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
     uint16_t tmpreg = 0;
 
@@ -324,7 +334,8 @@
     i2c->OAR1 |= I2C_OAR1_OA1EN;
 }
 
-void i2c_slave_mode(i2c_t *obj, int enable_slave) {
+void i2c_slave_mode(i2c_t *obj, int enable_slave)
+{
 
     I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
     uint16_t tmpreg;
@@ -350,7 +361,8 @@
 #define WriteGeneral   2 // the master is writing to all slave
 #define WriteAddressed 3 // the master is writing to this slave (slave = receiver)
 
-int i2c_slave_receive(i2c_t *obj) {
+int i2c_slave_receive(i2c_t *obj)
+{
     I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
     int retValue = NoData;
 
@@ -368,7 +380,8 @@
     return (retValue);
 }
 
-int i2c_slave_read(i2c_t *obj, char *data, int length) {
+int i2c_slave_read(i2c_t *obj, char *data, int length)
+{
     char size = 0;
 
     while (size < length) data[size++] = (char)i2c_byte_read(obj, 0);
@@ -376,7 +389,8 @@
     return size;
 }
 
-int i2c_slave_write(i2c_t *obj, const char *data, int length) {
+int i2c_slave_write(i2c_t *obj, const char *data, int length)
+{
     char size = 0;
     I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);