File content as of revision 2:1a87f74b8e3b:

/**********************************************************************
* $Id$        lpc_phy_dp83848.c            2011-11-20
*//**
* @file        lpc_phy_dp83848.c
* @brief    DP83848C PHY status and control.
* @version    1.0
* @date        20 Nov. 2011
* @author    NXP MCU SW Application Team
*
* Copyright(C) 2011, NXP Semiconductor
* All rights reserved.
*
***********************************************************************
* Software that is described herein is for illustrative purposes only
* which provides customers with programming information regarding the
* products. This software is supplied "AS IS" without any warranties.
* NXP Semiconductors assumes no responsibility or liability for the
* use of the software, conveys no license or title under any patent,
* copyright, or mask work right to the product. NXP Semiconductors
* reserves the right to make changes in the software without
* notification. NXP Semiconductors also make no representation or
* warranty that such application will be suitable for the specified
* use without further testing or modification.
**********************************************************************/

#include "lwip/opt.h"

#if NET_ETHERNET

#include "lwip/err.h"
#include "lwip/snmp.h"
#include "lpc_emac_config.h"
#include "lpc_phy.h"
#include "sys_arch.h"

/** @defgroup dp83848_phy    PHY status and control for the DP83848.
 * @ingroup lwip_phy
 *
 * Various functions for controlling and monitoring the status of the
 * DP83848 PHY. In polled (standalone) systems, the PHY state must be
 * monitored as part of the application. In a threaded (RTOS) system,
 * the PHY state is monitored by the PHY handler thread. The MAC
 * driver will not transmit unless the PHY link is active.
 * @{
 */

/** \brief  DP83848 PHY register offsets */
#define DP8_BMCR_REG        0x0  /**< Basic Mode Control Register */
#define DP8_BMSR_REG        0x1  /**< Basic Mode Status Reg */
#define DP8_ANADV_REG       0x4  /**< Auto_Neg Advt Reg  */
#define DP8_ANLPA_REG       0x5  /**< Auto_neg Link Partner Ability Reg */
#define DP8_ANEEXP_REG      0x6  /**< Auto-neg Expansion Reg  */
#define DP8_PHY_STAT_REG    0x10 /**< PHY Status Register  */
#define DP8_PHY_INT_CTL_REG 0x11 /**< PHY Interrupt Control Register */
#define DP8_PHY_STS_REG     0x19 /**< PHY Status Register  */

/** \brief DP83848 Control register definitions */
#define DP8_RESET          (1 << 15)  /**< 1= S/W Reset */
#define DP8_LOOPBACK       (1 << 14)  /**< 1=loopback Enabled */
#define DP8_SPEED_SELECT   (1 << 13)  /**< 1=Select 100MBps */
#define DP8_AUTONEG        (1 << 12)  /**< 1=Enable auto-negotiation */
#define DP8_POWER_DOWN     (1 << 11)  /**< 1=Power down PHY */
#define DP8_ISOLATE        (1 << 10)  /**< 1=Isolate PHY */
#define DP8_RESTART_AUTONEG (1 << 9)  /**< 1=Restart auto-negoatiation */
#define DP8_DUPLEX_MODE    (1 << 8)   /**< 1=Full duplex mode */
#define DP8_COLLISION_TEST (1 << 7)   /**< 1=Perform collsion test */

/** \brief DP83848 Status register definitions */
#define DP8_100BASE_T4     (1 << 15)  /**< T4 mode */
#define DP8_100BASE_TX_FD  (1 << 14)  /**< 100MBps full duplex */
#define DP8_100BASE_TX_HD  (1 << 13)  /**< 100MBps half duplex */
#define DP8_10BASE_T_FD    (1 << 12)  /**< 100Bps full duplex */
#define DP8_10BASE_T_HD    (1 << 11)  /**< 10MBps half duplex */
#define DP8_MF_PREAMB_SUPPR (1 << 6)  /**< Preamble suppress */
#define DP8_AUTONEG_COMP   (1 << 5)   /**< Auto-negotation complete */
#define DP8_RMT_FAULT      (1 << 4)   /**< Fault */
#define DP8_AUTONEG_ABILITY (1 << 3)  /**< Auto-negotation supported */
#define DP8_LINK_STATUS    (1 << 2)   /**< 1=Link active */
#define DP8_JABBER_DETECT  (1 << 1)   /**< Jabber detect */
#define DP8_EXTEND_CAPAB   (1 << 0)   /**< Supports extended capabilities */

/** \brief DP83848 PHY status definitions */
#define DP8_REMOTEFAULT    (1 << 6)   /**< Remote fault */
#define DP8_FULLDUPLEX     (1 << 2)   /**< 1=full duplex */
#define DP8_SPEED10MBPS    (1 << 1)   /**< 1=10MBps speed */
#define DP8_VALID_LINK     (1 << 0)   /**< 1=Link active */

/** \brief DP83848 PHY ID register definitions */
#define DP8_PHYID1_OUI     0x2000     /**< Expected PHY ID1 */
#define DP8_PHYID2_OUI     0x5c90     /**< Expected PHY ID2 */

/** \brief PHY status structure used to indicate current status of PHY.
 */
typedef struct {
    u32_t     phy_speed_100mbs:1; /**< 10/100 MBS connection speed flag. */
    u32_t     phy_full_duplex:1;  /**< Half/full duplex connection speed flag. */
    u32_t     phy_link_active:1;  /**< Phy link active flag. */
} PHY_STATUS_TYPE;

/** \brief  PHY update flags */
static PHY_STATUS_TYPE physts;

/** \brief  Last PHY update flags, used for determing if something has changed */
static PHY_STATUS_TYPE olddphysts;

/** \brief  PHY update counter for state machine */
static s32_t phyustate;

/** \brief  Update PHY status from passed value
 *
 *  This function updates the current PHY status based on the
 *  passed PHY status word. The PHY status indicate if the link
 *  is active, the connection speed, and duplex.
 *
 *  \param[in]    netif   NETIF structure
 *  \param[in]    linksts Status word from PHY
 *  \return        1 if the status has changed, otherwise 0
 */
static s32_t lpc_update_phy_sts(struct netif *netif, u32_t linksts)
{
    s32_t changed = 0;

    /* Update link active status */
    if (linksts & DP8_VALID_LINK)
        physts.phy_link_active = 1;
    else
        physts.phy_link_active = 0;

    /* Full or half duplex */
    if (linksts & DP8_FULLDUPLEX)
        physts.phy_full_duplex = 1;
    else
        physts.phy_full_duplex = 0;

    /* Configure 100MBit/10MBit mode. */
    if (linksts & DP8_SPEED10MBPS)
        physts.phy_speed_100mbs = 0;
    else
        physts.phy_speed_100mbs = 1;

    if (physts.phy_speed_100mbs != olddphysts.phy_speed_100mbs) {
        changed = 1;
        if (physts.phy_speed_100mbs) {
            /* 100MBit mode. */
            lpc_emac_set_speed(1);

            NETIF_INIT_SNMP(netif, snmp_ifType_ethernet_csmacd, 100000000);
        }
        else {
            /* 10MBit mode. */
            lpc_emac_set_speed(0);

            NETIF_INIT_SNMP(netif, snmp_ifType_ethernet_csmacd, 10000000);
        }

        olddphysts.phy_speed_100mbs = physts.phy_speed_100mbs;
    }

    if (physts.phy_full_duplex != olddphysts.phy_full_duplex) {
        changed = 1;
        if (physts.phy_full_duplex)
            lpc_emac_set_duplex(1);
        else
            lpc_emac_set_duplex(0);

        olddphysts.phy_full_duplex = physts.phy_full_duplex;
    }

    if (physts.phy_link_active != olddphysts.phy_link_active) {
        changed = 1;
        if (physts.phy_link_active)
            netif_set_link_up(netif);
        else
            netif_set_link_down(netif);

        olddphysts.phy_link_active = physts.phy_link_active;
    }

    return changed;
}

/** \brief  Initialize the DP83848 PHY.
 *
 *  This function initializes the DP83848 PHY. It will block until
 *  complete. This function is called as part of the EMAC driver
 *  initialization. Configuration of the PHY at startup is
 *  controlled by setting up configuration defines in lpc_phy.h.
 *
 *  \param[in]     netif   NETIF structure
 *  \return         ERR_OK if the setup was successful, otherwise ERR_TIMEOUT
 */
err_t lpc_phy_init(struct netif *netif)
{
    u32_t tmp;
    s32_t i;

    physts.phy_speed_100mbs = olddphysts.phy_speed_100mbs = 2;
    physts.phy_full_duplex = olddphysts.phy_full_duplex = 2;
    physts.phy_link_active = olddphysts.phy_link_active = 2;
    phyustate = 0;

    /* Only first read and write are checked for failure */
    /* Put the DP83848C in reset mode and wait for completion */
    if (lpc_mii_write(DP8_BMCR_REG, DP8_RESET) != 0)
        return ERR_TIMEOUT;
    i = 400;
    while (i > 0) {
        osDelay(1);   /* 1 ms */
        if (lpc_mii_read(DP8_BMCR_REG, &tmp) != 0)
            return ERR_TIMEOUT;

        if (!(tmp & (DP8_RESET | DP8_POWER_DOWN)))
            i = -1;
        else
            i--;
    }
    /* Timeout? */
    if (i == 0)
        return ERR_TIMEOUT;

    /* Setup link based on configuration options */
#if PHY_USE_AUTONEG==1
    tmp = DP8_AUTONEG;
#else
    tmp = 0;
#endif
#if PHY_USE_100MBS==1
    tmp |= DP8_SPEED_SELECT;
#endif
#if PHY_USE_FULL_DUPLEX==1
    tmp |= DP8_DUPLEX_MODE;
#endif
    lpc_mii_write(DP8_BMCR_REG, tmp);

    /* The link is not set active at this point, but will be detected
       later */

    return ERR_OK;
}

/* Phy status update state machine */
s32_t lpc_phy_sts_sm(struct netif *netif)
{
    s32_t changed = 0;

    switch (phyustate) {
        default:
        case 0:
            /* Read BMSR to clear faults */
            lpc_mii_read_noblock(DP8_PHY_STAT_REG);
            phyustate = 1;
            break;

        case 1:
            /* Wait for read status state */
            if (!lpc_mii_is_busy()) {
                /* Update PHY status */
                changed = lpc_update_phy_sts(netif, lpc_mii_read_data());
                phyustate = 0;
            }
            break;
    }

    return changed;
}

#endif

/**
 * @}
 */

/* --------------------------------- End Of File ------------------------------ */