Beacon demo for the BLE API using the nRF51822 native mode drivers

Dependencies:   BLE_API mbed nRF51822 X_NUCLEO_IDB0XA1

Fork of BLE_iBeacon by Bluetooth Low Energy

main.cpp

Committer:
Vincent Coubard
Date:
2016-09-20
Revision:
79:4e16bde5c10a
Parent:
77:7674b63f8aea

File content as of revision 79:4e16bde5c10a:

/* mbed Microcontroller Library
 * Copyright (c) 2006-2015 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#include "mbed.h"
#include "ble/services/iBeacon.h"

BLE ble;
    
void bleInitComplete(BLE::InitializationCompleteCallbackContext *params)
{
    BLE &ble          = params->ble;
    ble_error_t error = params->error;

    if (error != BLE_ERROR_NONE) {
        return;
    }
    
    /**
     * The Beacon payload has the following composition:
     * 128-Bit / 16byte UUID = E2 0A 39 F4 73 F5 4B C4 A1 2F 17 D1 AD 07 A9 61
     * Major/Minor  = 0x1122 / 0x3344
     * Tx Power     = 0xC8 = 200, 2's compliment is 256-200 = (-56dB)
     *
     * Note: please remember to calibrate your beacons TX Power for more accurate results.
     */
    const uint8_t uuid[] = {0xE2, 0x0A, 0x39, 0xF4, 0x73, 0xF5, 0x4B, 0xC4,
                            0xA1, 0x2F, 0x17, 0xD1, 0xAD, 0x07, 0xA9, 0x61};
    uint16_t majorNumber = 1122;
    uint16_t minorNumber = 3344;
    uint16_t txPower     = 0xC8;
    iBeacon *ibeacon = new iBeacon(ble, uuid, majorNumber, minorNumber, txPower);

    ble.gap().setAdvertisingInterval(1000); /* 1000ms. */
    ble.gap().startAdvertising();
}

int main(void)
{
    ble.init(bleInitComplete);
    
    /* SpinWait for initialization to complete. This is necessary because the
     * BLE object is used in the main loop below. */
    while (!ble.hasInitialized()) { /* spin loop */ }

    while (true) {
        ble.waitForEvent(); // allows or low power operation
    }
}