Buletooth module(RX-42XVP) sample program
Buletoothモジュール(RN-42XVP)の青mbed(LPC1768)での動作確認
<概要>
トランジスタ技術2014年3月号 3章のBuletoothモジュール(RN-42XVP)とLPC810を使った作例で、LPC810を青mbed(LPC1768)に変更して、配線とmbedプログラムを簡素化して動作確認をしやすくしました。
動作例動画:
<機材準備>
- 配線 Buletoothモジュールへの電源供給はmbedから行います。またシリアル通信線2本をmbedに接続します。
RN-42XVP | mbed(LPC1768) |
---|---|
Pin1(Vcc) | VOUT(3.3V) |
Pin2(DOUT) | p14(rx) |
Pin3(DIN) | p13(tx) |
Pin10 | GND(0V) |
- Androidアプリ
AndroidアプリはCQ出版社のwebからダウンロードします。
http://toragi.cqpub.co.jp/tabid/707/Default.aspx
パソコンからandroidへのインストールはトランジスタ技術の記事を参照してください。
- 青mbed(LPC1768)のプログラム
Mbedのwebからダウンロードしてください。
Import programRN-42XVPsample
Buletooth module(RX-42XVP) sample program
<動作>
Androidアプリはテンキー(0~9)と”LED ON/OFF”のボタンがあり、これらのボタンを押すとアスキーコードの’0’~’9’,’+’,’-‘が送信されます。これを青mbedで受信して、mbed上の4つのLEDを制御します。また受信したデータをmbedのUSB-Serialで外部に送信します。パソコンでターミナルソフト(TeraTarmなど)で確認できます。
以上
main.cpp
- Committer:
- suupen
- Date:
- 2014-02-23
- Revision:
- 0:66a02c06ec33
File content as of revision 0:66a02c06ec33:
/** Transistor Gijutsu 2014nen 3gatugo page.64 3syo Buletooth ban LPC810 wo LPC1768 ni henko sita sample program RN-42XVP LPC1768 ------------------- Pin1 VOUT Pin2 p14(rx) Pin3 p13(tx) Pin10 GND */ #include "mbed.h" BusOut myleds(LED1, LED2, LED3, LED4); Serial pc(USBTX, USBRX); // (tx, rx) Serial xbee(p13, p14); // (tx,rx) RN-42XVP tuusinyo serial int main() { uint8_t rawData; uint8_t newData; xbee.baud(115200); while(1) { if(1 == xbee.readable()) { rawData = xbee.getc(); pc.printf("rawData = %02x\n",rawData); if(rawData != 0x00) { if(rawData == '+') { newData = 0x0f; } else if(rawData == '-') { newData = 0x00; } else if(rawData == '0') { newData = 0x0a; } else { newData = rawData - '0'; } myleds = newData; } } } }