mbed official
The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
mbed 2
This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.
TARGET_SAMD21J18A/samd21g18a.h
- Committer:
- Kojto
- Date:
- 2016-04-27
- Revision:
- 119:aae6fcc7d9bb
- Parent:
- 111:4336505e4b1c
File content as of revision 119:aae6fcc7d9bb:
/**
* \file
*
* \brief Header file for SAMD21G18A
*
* Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
*
* \asf_license_start
*
* \page License
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* 3. The name of Atmel may not be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* 4. This software may only be redistributed and used in connection with an
* Atmel microcontroller product.
*
* THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
* \asf_license_stop
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef _SAMD21G18A_
#define _SAMD21G18A_
/**
* \ingroup SAMD21_definitions
* \addtogroup SAMD21G18A_definitions SAMD21G18A definitions
* This file defines all structures and symbols for SAMD21G18A:
* - registers and bitfields
* - peripheral base address
* - peripheral ID
* - PIO definitions
*/
/*@{*/
#ifdef __cplusplus
extern "C" {
#endif
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
#include <stdint.h>
#ifndef __cplusplus
typedef volatile const uint32_t RoReg; /**< Read only 32-bit register (volatile const unsigned int) */
typedef volatile const uint16_t RoReg16; /**< Read only 16-bit register (volatile const unsigned int) */
typedef volatile const uint8_t RoReg8; /**< Read only 8-bit register (volatile const unsigned int) */
#else
typedef volatile uint32_t RoReg; /**< Read only 32-bit register (volatile const unsigned int) */
typedef volatile uint16_t RoReg16; /**< Read only 16-bit register (volatile const unsigned int) */
typedef volatile uint8_t RoReg8; /**< Read only 8-bit register (volatile const unsigned int) */
#endif
typedef volatile uint32_t WoReg; /**< Write only 32-bit register (volatile unsigned int) */
typedef volatile uint16_t WoReg16; /**< Write only 16-bit register (volatile unsigned int) */
typedef volatile uint32_t WoReg8; /**< Write only 8-bit register (volatile unsigned int) */
typedef volatile uint32_t RwReg; /**< Read-Write 32-bit register (volatile unsigned int) */
typedef volatile uint16_t RwReg16; /**< Read-Write 16-bit register (volatile unsigned int) */
typedef volatile uint8_t RwReg8; /**< Read-Write 8-bit register (volatile unsigned int) */
#define CAST(type, value) ((type *)(value))
#define REG_ACCESS(type, address) (*(type*)(address)) /**< C code: Register value */
#else
#define CAST(type, value) (value)
#define REG_ACCESS(type, address) (address) /**< Assembly code: Register address */
#endif
/* ************************************************************************** */
/** CMSIS DEFINITIONS FOR SAMD21G18A */
/* ************************************************************************** */
/** \defgroup SAMD21G18A_cmsis CMSIS Definitions */
/*@{*/
/** Interrupt Number Definition */
typedef enum IRQn {
/****** Cortex-M0+ Processor Exceptions Numbers ******************************/
NonMaskableInt_IRQn = -14,/**< 2 Non Maskable Interrupt */
HardFault_IRQn = -13,/**< 3 Cortex-M0+ Hard Fault Interrupt */
SVCall_IRQn = -5, /**< 11 Cortex-M0+ SV Call Interrupt */
PendSV_IRQn = -2, /**< 14 Cortex-M0+ Pend SV Interrupt */
SysTick_IRQn = -1, /**< 15 Cortex-M0+ System Tick Interrupt */
/****** SAMD21G18A-specific Interrupt Numbers ***********************/
PM_IRQn = 0, /**< 0 SAMD21G18A Power Manager (PM) */
SYSCTRL_IRQn = 1, /**< 1 SAMD21G18A System Control (SYSCTRL) */
WDT_IRQn = 2, /**< 2 SAMD21G18A Watchdog Timer (WDT) */
RTC_IRQn = 3, /**< 3 SAMD21G18A Real-Time Counter (RTC) */
EIC_IRQn = 4, /**< 4 SAMD21G18A External Interrupt Controller (EIC) */
NVMCTRL_IRQn = 5, /**< 5 SAMD21G18A Non-Volatile Memory Controller (NVMCTRL) */
DMAC_IRQn = 6, /**< 6 SAMD21G18A Direct Memory Access Controller (DMAC) */
USB_IRQn = 7, /**< 7 SAMD21G18A Universal Serial Bus (USB) */
EVSYS_IRQn = 8, /**< 8 SAMD21G18A Event System Interface (EVSYS) */
SERCOM0_IRQn = 9, /**< 9 SAMD21G18A Serial Communication Interface 0 (SERCOM0) */
SERCOM1_IRQn = 10, /**< 10 SAMD21G18A Serial Communication Interface 1 (SERCOM1) */
SERCOM2_IRQn = 11, /**< 11 SAMD21G18A Serial Communication Interface 2 (SERCOM2) */
SERCOM3_IRQn = 12, /**< 12 SAMD21G18A Serial Communication Interface 3 (SERCOM3) */
SERCOM4_IRQn = 13, /**< 13 SAMD21G18A Serial Communication Interface 4 (SERCOM4) */
SERCOM5_IRQn = 14, /**< 14 SAMD21G18A Serial Communication Interface 5 (SERCOM5) */
TCC0_IRQn = 15, /**< 15 SAMD21G18A Timer Counter Control 0 (TCC0) */
TCC1_IRQn = 16, /**< 16 SAMD21G18A Timer Counter Control 1 (TCC1) */
TCC2_IRQn = 17, /**< 17 SAMD21G18A Timer Counter Control 2 (TCC2) */
TC3_IRQn = 18, /**< 18 SAMD21G18A Basic Timer Counter 3 (TC3) */
TC4_IRQn = 19, /**< 19 SAMD21G18A Basic Timer Counter 4 (TC4) */
TC5_IRQn = 20, /**< 20 SAMD21G18A Basic Timer Counter 5 (TC5) */
ADC_IRQn = 23, /**< 23 SAMD21G18A Analog Digital Converter (ADC) */
AC_IRQn = 24, /**< 24 SAMD21G18A Analog Comparators (AC) */
DAC_IRQn = 25, /**< 25 SAMD21G18A Digital Analog Converter (DAC) */
PTC_IRQn = 26, /**< 26 SAMD21G18A Peripheral Touch Controller (PTC) */
I2S_IRQn = 27, /**< 27 SAMD21G18A Inter-IC Sound Interface (I2S) */
PERIPH_COUNT_IRQn = 28 /**< Number of peripheral IDs */
} IRQn_Type;
typedef struct _DeviceVectors {
/* Stack pointer */
void* pvStack;
/* Cortex-M handlers */
void* pfnReset_Handler;
void* pfnNMI_Handler;
void* pfnHardFault_Handler;
void* pfnReservedM12;
void* pfnReservedM11;
void* pfnReservedM10;
void* pfnReservedM9;
void* pfnReservedM8;
void* pfnReservedM7;
void* pfnReservedM6;
void* pfnSVC_Handler;
void* pfnReservedM4;
void* pfnReservedM3;
void* pfnPendSV_Handler;
void* pfnSysTick_Handler;
/* Peripheral handlers */
void* pfnPM_Handler; /* 0 Power Manager */
void* pfnSYSCTRL_Handler; /* 1 System Control */
void* pfnWDT_Handler; /* 2 Watchdog Timer */
void* pfnRTC_Handler; /* 3 Real-Time Counter */
void* pfnEIC_Handler; /* 4 External Interrupt Controller */
void* pfnNVMCTRL_Handler; /* 5 Non-Volatile Memory Controller */
void* pfnDMAC_Handler; /* 6 Direct Memory Access Controller */
void* pfnUSB_Handler; /* 7 Universal Serial Bus */
void* pfnEVSYS_Handler; /* 8 Event System Interface */
void* pfnSERCOM0_Handler; /* 9 Serial Communication Interface 0 */
void* pfnSERCOM1_Handler; /* 10 Serial Communication Interface 1 */
void* pfnSERCOM2_Handler; /* 11 Serial Communication Interface 2 */
void* pfnSERCOM3_Handler; /* 12 Serial Communication Interface 3 */
void* pfnSERCOM4_Handler; /* 13 Serial Communication Interface 4 */
void* pfnSERCOM5_Handler; /* 14 Serial Communication Interface 5 */
void* pfnTCC0_Handler; /* 15 Timer Counter Control 0 */
void* pfnTCC1_Handler; /* 16 Timer Counter Control 1 */
void* pfnTCC2_Handler; /* 17 Timer Counter Control 2 */
void* pfnTC3_Handler; /* 18 Basic Timer Counter 3 */
void* pfnTC4_Handler; /* 19 Basic Timer Counter 4 */
void* pfnTC5_Handler; /* 20 Basic Timer Counter 5 */
void* pfnReserved21;
void* pfnReserved22;
void* pfnADC_Handler; /* 23 Analog Digital Converter */
void* pfnAC_Handler; /* 24 Analog Comparators */
void* pfnDAC_Handler; /* 25 Digital Analog Converter */
void* pfnPTC_Handler; /* 26 Peripheral Touch Controller */
void* pfnI2S_Handler; /* 27 Inter-IC Sound Interface */
} DeviceVectors;
/* Cortex-M0+ processor handlers */
void Reset_Handler ( void );
void NMI_Handler ( void );
void HardFault_Handler ( void );
void SVC_Handler ( void );
void PendSV_Handler ( void );
void SysTick_Handler ( void );
/* Peripherals handlers */
void PM_Handler ( void );
void SYSCTRL_Handler ( void );
void WDT_Handler ( void );
void RTC_Handler ( void );
void EIC_Handler ( void );
void NVMCTRL_Handler ( void );
void DMAC_Handler ( void );
void USB_Handler ( void );
void EVSYS_Handler ( void );
void SERCOM0_Handler ( void );
void SERCOM1_Handler ( void );
void SERCOM2_Handler ( void );
void SERCOM3_Handler ( void );
void SERCOM4_Handler ( void );
void SERCOM5_Handler ( void );
void TCC0_Handler ( void );
void TCC1_Handler ( void );
void TCC2_Handler ( void );
void TC3_Handler ( void );
void TC4_Handler ( void );
void TC5_Handler ( void );
void ADC_Handler ( void );
void AC_Handler ( void );
void DAC_Handler ( void );
void PTC_Handler ( void );
void I2S_Handler ( void );
/*
* \brief Configuration of the Cortex-M0+ Processor and Core Peripherals
*/
#define LITTLE_ENDIAN 1
#define __CM0PLUS_REV 1 /*!< Core revision r0p1 */
#define __MPU_PRESENT 0 /*!< MPU present or not */
#define __NVIC_PRIO_BITS 2 /*!< Number of bits used for Priority Levels */
#define __VTOR_PRESENT 1 /*!< VTOR present or not */
#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
/**
* \brief CMSIS includes
*/
#include <core_cm0plus.h>
#if !defined DONT_USE_CMSIS_INIT
#include "system_samd21.h"
#endif /* DONT_USE_CMSIS_INIT */
/*@}*/
/* ************************************************************************** */
/** SOFTWARE PERIPHERAL API DEFINITION FOR SAMD21G18A */
/* ************************************************************************** */
/** \defgroup SAMD21G18A_api Peripheral Software API */
/*@{*/
#include "comp_ac.h"
#include "comp_adc.h"
#include "comp_dac.h"
#include "comp_dmac.h"
#include "comp_dsu.h"
#include "comp_eic.h"
#include "comp_evsys.h"
#include "comp_gclk.h"
#include "comp_hmatrixb.h"
#include "comp_i2s.h"
#include "comp_mtb.h"
#include "comp_nvmctrl.h"
#include "comp_pac.h"
#include "comp_pm.h"
#include "comp_port.h"
#include "comp_rtc.h"
#include "comp_sercom.h"
#include "comp_sysctrl.h"
#include "comp_tc.h"
#include "comp_tcc.h"
#include "comp_usb.h"
#include "comp_wdt.h"
/*@}*/
/* ************************************************************************** */
/** REGISTERS ACCESS DEFINITIONS FOR SAMD21G18A */
/* ************************************************************************** */
/** \defgroup SAMD21G18A_reg Registers Access Definitions */
/*@{*/
#include "ins_ac.h"
#include "ins_adc.h"
#include "ins_dac.h"
#include "ins_dmac.h"
#include "ins_dsu.h"
#include "ins_eic.h"
#include "ins_evsys.h"
#include "ins_gclk.h"
#include "ins_sbmatrix.h"
#include "ins_i2s.h"
#include "ins_mtb.h"
#include "ins_nvmctrl.h"
#include "ins_pac0.h"
#include "ins_pac1.h"
#include "ins_pac2.h"
#include "ins_pm.h"
#include "ins_port.h"
#include "ins_rtc.h"
#include "ins_sercom0.h"
#include "ins_sercom1.h"
#include "ins_sercom2.h"
#include "ins_sercom3.h"
#include "ins_sercom4.h"
#include "ins_sercom5.h"
#include "ins_sysctrl.h"
#include "ins_tc3.h"
#include "ins_tc4.h"
#include "ins_tc5.h"
#include "ins_tcc0.h"
#include "ins_tcc1.h"
#include "ins_tcc2.h"
#include "ins_usb.h"
#include "ins_wdt.h"
/*@}*/
/* ************************************************************************** */
/** PERIPHERAL ID DEFINITIONS FOR SAMD21G18A */
/* ************************************************************************** */
/** \defgroup SAMD21G18A_id Peripheral Ids Definitions */
/*@{*/
// Peripheral instances on HPB0 bridge
#define ID_PAC0 0 /**< \brief Peripheral Access Controller 0 (PAC0) */
#define ID_PM 1 /**< \brief Power Manager (PM) */
#define ID_SYSCTRL 2 /**< \brief System Control (SYSCTRL) */
#define ID_GCLK 3 /**< \brief Generic Clock Generator (GCLK) */
#define ID_WDT 4 /**< \brief Watchdog Timer (WDT) */
#define ID_RTC 5 /**< \brief Real-Time Counter (RTC) */
#define ID_EIC 6 /**< \brief External Interrupt Controller (EIC) */
// Peripheral instances on HPB1 bridge
#define ID_PAC1 32 /**< \brief Peripheral Access Controller 1 (PAC1) */
#define ID_DSU 33 /**< \brief Device Service Unit (DSU) */
#define ID_NVMCTRL 34 /**< \brief Non-Volatile Memory Controller (NVMCTRL) */
#define ID_PORT 35 /**< \brief Port Module (PORT) */
#define ID_DMAC 36 /**< \brief Direct Memory Access Controller (DMAC) */
#define ID_USB 37 /**< \brief Universal Serial Bus (USB) */
#define ID_MTB 38 /**< \brief Cortex-M0+ Micro-Trace Buffer (MTB) */
#define ID_SBMATRIX 39 /**< \brief HSB Matrix (SBMATRIX) */
// Peripheral instances on HPB2 bridge
#define ID_PAC2 64 /**< \brief Peripheral Access Controller 2 (PAC2) */
#define ID_EVSYS 65 /**< \brief Event System Interface (EVSYS) */
#define ID_SERCOM0 66 /**< \brief Serial Communication Interface 0 (SERCOM0) */
#define ID_SERCOM1 67 /**< \brief Serial Communication Interface 1 (SERCOM1) */
#define ID_SERCOM2 68 /**< \brief Serial Communication Interface 2 (SERCOM2) */
#define ID_SERCOM3 69 /**< \brief Serial Communication Interface 3 (SERCOM3) */
#define ID_SERCOM4 70 /**< \brief Serial Communication Interface 4 (SERCOM4) */
#define ID_SERCOM5 71 /**< \brief Serial Communication Interface 5 (SERCOM5) */
#define ID_TCC0 72 /**< \brief Timer Counter Control 0 (TCC0) */
#define ID_TCC1 73 /**< \brief Timer Counter Control 1 (TCC1) */
#define ID_TCC2 74 /**< \brief Timer Counter Control 2 (TCC2) */
#define ID_TC3 75 /**< \brief Basic Timer Counter 3 (TC3) */
#define ID_TC4 76 /**< \brief Basic Timer Counter 4 (TC4) */
#define ID_TC5 77 /**< \brief Basic Timer Counter 5 (TC5) */
#define ID_ADC 80 /**< \brief Analog Digital Converter (ADC) */
#define ID_AC 81 /**< \brief Analog Comparators (AC) */
#define ID_DAC 82 /**< \brief Digital Analog Converter (DAC) */
#define ID_PTC 83 /**< \brief Peripheral Touch Controller (PTC) */
#define ID_I2S 84 /**< \brief Inter-IC Sound Interface (I2S) */
#define ID_PERIPH_COUNT 85 /**< \brief Number of peripheral IDs */
/*@}*/
/* ************************************************************************** */
/** BASE ADDRESS DEFINITIONS FOR SAMD21G18A */
/* ************************************************************************** */
/** \defgroup SAMD21G18A_base Peripheral Base Address Definitions */
/*@{*/
#if defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)
#define AC (0x42004400UL) /**< \brief (AC) APB Base Address */
#define ADC (0x42004000UL) /**< \brief (ADC) APB Base Address */
#define DAC (0x42004800UL) /**< \brief (DAC) APB Base Address */
#define DMAC (0x41004800UL) /**< \brief (DMAC) APB Base Address */
#define DSU (0x41002000UL) /**< \brief (DSU) APB Base Address */
#define EIC (0x40001800UL) /**< \brief (EIC) APB Base Address */
#define EVSYS (0x42000400UL) /**< \brief (EVSYS) APB Base Address */
#define GCLK (0x40000C00UL) /**< \brief (GCLK) APB Base Address */
#define SBMATRIX (0x41007000UL) /**< \brief (SBMATRIX) APB Base Address */
#define I2S (0x42005000UL) /**< \brief (I2S) APB Base Address */
#define MTB (0x41006000UL) /**< \brief (MTB) APB Base Address */
#define NVMCTRL (0x41004000UL) /**< \brief (NVMCTRL) APB Base Address */
#define NVMCTRL_CAL (0x00800000UL) /**< \brief (NVMCTRL) CAL Base Address */
#define NVMCTRL_LOCKBIT (0x00802000UL) /**< \brief (NVMCTRL) LOCKBIT Base Address */
#define NVMCTRL_OTP1 (0x00806000UL) /**< \brief (NVMCTRL) OTP1 Base Address */
#define NVMCTRL_OTP2 (0x00806008UL) /**< \brief (NVMCTRL) OTP2 Base Address */
#define NVMCTRL_OTP4 (0x00806020UL) /**< \brief (NVMCTRL) OTP4 Base Address */
#define NVMCTRL_TEMP_LOG (0x00806030UL) /**< \brief (NVMCTRL) TEMP_LOG Base Address */
#define NVMCTRL_USER (0x00804000UL) /**< \brief (NVMCTRL) USER Base Address */
#define PAC0 (0x40000000UL) /**< \brief (PAC0) APB Base Address */
#define PAC1 (0x41000000UL) /**< \brief (PAC1) APB Base Address */
#define PAC2 (0x42000000UL) /**< \brief (PAC2) APB Base Address */
#define PM (0x40000400UL) /**< \brief (PM) APB Base Address */
#define PORT (0x41004400UL) /**< \brief (PORT) APB Base Address */
#define PORT_IOBUS (0x60000000UL) /**< \brief (PORT) IOBUS Base Address */
#define RTC (0x40001400UL) /**< \brief (RTC) APB Base Address */
#define SERCOM0 (0x42000800UL) /**< \brief (SERCOM0) APB Base Address */
#define SERCOM1 (0x42000C00UL) /**< \brief (SERCOM1) APB Base Address */
#define SERCOM2 (0x42001000UL) /**< \brief (SERCOM2) APB Base Address */
#define SERCOM3 (0x42001400UL) /**< \brief (SERCOM3) APB Base Address */
#define SERCOM4 (0x42001800UL) /**< \brief (SERCOM4) APB Base Address */
#define SERCOM5 (0x42001C00UL) /**< \brief (SERCOM5) APB Base Address */
#define SYSCTRL (0x40000800UL) /**< \brief (SYSCTRL) APB Base Address */
#define TC3 (0x42002C00UL) /**< \brief (TC3) APB Base Address */
#define TC4 (0x42003000UL) /**< \brief (TC4) APB Base Address */
#define TC5 (0x42003400UL) /**< \brief (TC5) APB Base Address */
#define TCC0 (0x42002000UL) /**< \brief (TCC0) APB Base Address */
#define TCC1 (0x42002400UL) /**< \brief (TCC1) APB Base Address */
#define TCC2 (0x42002800UL) /**< \brief (TCC2) APB Base Address */
#define USB (0x41005000UL) /**< \brief (USB) APB Base Address */
#define WDT (0x40001000UL) /**< \brief (WDT) APB Base Address */
#else
#define AC ((Ac *)0x42004400UL) /**< \brief (AC) APB Base Address */
#define AC_INST_NUM 1 /**< \brief (AC) Number of instances */
#define AC_INSTS { AC } /**< \brief (AC) Instances List */
#define ADC ((Adc *)0x42004000UL) /**< \brief (ADC) APB Base Address */
#define ADC_INST_NUM 1 /**< \brief (ADC) Number of instances */
#define ADC_INSTS { ADC } /**< \brief (ADC) Instances List */
#define DAC ((Dac *)0x42004800UL) /**< \brief (DAC) APB Base Address */
#define DAC_INST_NUM 1 /**< \brief (DAC) Number of instances */
#define DAC_INSTS { DAC } /**< \brief (DAC) Instances List */
#define DMAC ((Dmac *)0x41004800UL) /**< \brief (DMAC) APB Base Address */
#define DMAC_INST_NUM 1 /**< \brief (DMAC) Number of instances */
#define DMAC_INSTS { DMAC } /**< \brief (DMAC) Instances List */
#define DSU ((Dsu *)0x41002000UL) /**< \brief (DSU) APB Base Address */
#define DSU_INST_NUM 1 /**< \brief (DSU) Number of instances */
#define DSU_INSTS { DSU } /**< \brief (DSU) Instances List */
#define EIC ((Eic *)0x40001800UL) /**< \brief (EIC) APB Base Address */
#define EIC_INST_NUM 1 /**< \brief (EIC) Number of instances */
#define EIC_INSTS { EIC } /**< \brief (EIC) Instances List */
#define EVSYS ((Evsys *)0x42000400UL) /**< \brief (EVSYS) APB Base Address */
#define EVSYS_INST_NUM 1 /**< \brief (EVSYS) Number of instances */
#define EVSYS_INSTS { EVSYS } /**< \brief (EVSYS) Instances List */
#define GCLK ((Gclk *)0x40000C00UL) /**< \brief (GCLK) APB Base Address */
#define GCLK_INST_NUM 1 /**< \brief (GCLK) Number of instances */
#define GCLK_INSTS { GCLK } /**< \brief (GCLK) Instances List */
#define SBMATRIX ((Hmatrixb *)0x41007000UL) /**< \brief (SBMATRIX) APB Base Address */
#define HMATRIXB_INST_NUM 1 /**< \brief (HMATRIXB) Number of instances */
#define HMATRIXB_INSTS { SBMATRIX } /**< \brief (HMATRIXB) Instances List */
#define I2S ((I2s *)0x42005000UL) /**< \brief (I2S) APB Base Address */
#define I2S_INST_NUM 1 /**< \brief (I2S) Number of instances */
#define I2S_INSTS { I2S } /**< \brief (I2S) Instances List */
#define MTB ((Mtb *)0x41006000UL) /**< \brief (MTB) APB Base Address */
#define MTB_INST_NUM 1 /**< \brief (MTB) Number of instances */
#define MTB_INSTS { MTB } /**< \brief (MTB) Instances List */
#define NVMCTRL ((Nvmctrl *)0x41004000UL) /**< \brief (NVMCTRL) APB Base Address */
#define NVMCTRL_CAL (0x00800000UL) /**< \brief (NVMCTRL) CAL Base Address */
#define NVMCTRL_LOCKBIT (0x00802000UL) /**< \brief (NVMCTRL) LOCKBIT Base Address */
#define NVMCTRL_OTP1 (0x00806000UL) /**< \brief (NVMCTRL) OTP1 Base Address */
#define NVMCTRL_OTP2 (0x00806008UL) /**< \brief (NVMCTRL) OTP2 Base Address */
#define NVMCTRL_OTP4 (0x00806020UL) /**< \brief (NVMCTRL) OTP4 Base Address */
#define NVMCTRL_TEMP_LOG (0x00806030UL) /**< \brief (NVMCTRL) TEMP_LOG Base Address */
#define NVMCTRL_USER (0x00804000UL) /**< \brief (NVMCTRL) USER Base Address */
#define NVMCTRL_INST_NUM 1 /**< \brief (NVMCTRL) Number of instances */
#define NVMCTRL_INSTS { NVMCTRL } /**< \brief (NVMCTRL) Instances List */
#define PAC0 ((Pac *)0x40000000UL) /**< \brief (PAC0) APB Base Address */
#define PAC1 ((Pac *)0x41000000UL) /**< \brief (PAC1) APB Base Address */
#define PAC2 ((Pac *)0x42000000UL) /**< \brief (PAC2) APB Base Address */
#define PAC_INST_NUM 3 /**< \brief (PAC) Number of instances */
#define PAC_INSTS { PAC0, PAC1, PAC2 } /**< \brief (PAC) Instances List */
#define PM ((Pm *)0x40000400UL) /**< \brief (PM) APB Base Address */
#define PM_INST_NUM 1 /**< \brief (PM) Number of instances */
#define PM_INSTS { PM } /**< \brief (PM) Instances List */
#define PORT ((Port *)0x41004400UL) /**< \brief (PORT) APB Base Address */
#define PORT_IOBUS ((Port *)0x60000000UL) /**< \brief (PORT) IOBUS Base Address */
#define PORT_INST_NUM 1 /**< \brief (PORT) Number of instances */
#define PORT_INSTS { PORT } /**< \brief (PORT) Instances List */
#define PTC_GCLK_ID 34
#define PTC_INST_NUM 1 /**< \brief (PTC) Number of instances */
#define PTC_INSTS { PTC } /**< \brief (PTC) Instances List */
#define RTC ((Rtc *)0x40001400UL) /**< \brief (RTC) APB Base Address */
#define RTC_INST_NUM 1 /**< \brief (RTC) Number of instances */
#define RTC_INSTS { RTC } /**< \brief (RTC) Instances List */
#define SERCOM0 ((Sercom *)0x42000800UL) /**< \brief (SERCOM0) APB Base Address */
#define SERCOM1 ((Sercom *)0x42000C00UL) /**< \brief (SERCOM1) APB Base Address */
#define SERCOM2 ((Sercom *)0x42001000UL) /**< \brief (SERCOM2) APB Base Address */
#define SERCOM3 ((Sercom *)0x42001400UL) /**< \brief (SERCOM3) APB Base Address */
#define SERCOM4 ((Sercom *)0x42001800UL) /**< \brief (SERCOM4) APB Base Address */
#define SERCOM5 ((Sercom *)0x42001C00UL) /**< \brief (SERCOM5) APB Base Address */
#define SERCOM_INST_NUM 6 /**< \brief (SERCOM) Number of instances */
#define SERCOM_INSTS { SERCOM0, SERCOM1, SERCOM2, SERCOM3, SERCOM4, SERCOM5 } /**< \brief (SERCOM) Instances List */
#define SYSCTRL ((Sysctrl *)0x40000800UL) /**< \brief (SYSCTRL) APB Base Address */
#define SYSCTRL_INST_NUM 1 /**< \brief (SYSCTRL) Number of instances */
#define SYSCTRL_INSTS { SYSCTRL } /**< \brief (SYSCTRL) Instances List */
#define TC3 ((Tc *)0x42002C00UL) /**< \brief (TC3) APB Base Address */
#define TC4 ((Tc *)0x42003000UL) /**< \brief (TC4) APB Base Address */
#define TC5 ((Tc *)0x42003400UL) /**< \brief (TC5) APB Base Address */
#define TC_INST_NUM 3 /**< \brief (TC) Number of instances */
#define TC_INSTS { TC3, TC4, TC5 } /**< \brief (TC) Instances List */
#define TCC0 ((Tcc *)0x42002000UL) /**< \brief (TCC0) APB Base Address */
#define TCC1 ((Tcc *)0x42002400UL) /**< \brief (TCC1) APB Base Address */
#define TCC2 ((Tcc *)0x42002800UL) /**< \brief (TCC2) APB Base Address */
#define TCC_INST_NUM 3 /**< \brief (TCC) Number of instances */
#define TCC_INSTS { TCC0, TCC1, TCC2 } /**< \brief (TCC) Instances List */
#define USB ((Usb *)0x41005000UL) /**< \brief (USB) APB Base Address */
#define USB_INST_NUM 1 /**< \brief (USB) Number of instances */
#define USB_INSTS { USB } /**< \brief (USB) Instances List */
#define WDT ((Wdt *)0x40001000UL) /**< \brief (WDT) APB Base Address */
#define WDT_INST_NUM 1 /**< \brief (WDT) Number of instances */
#define WDT_INSTS { WDT } /**< \brief (WDT) Instances List */
#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/*@}*/
/* ************************************************************************** */
/** PORT DEFINITIONS FOR SAMD21G18A */
/* ************************************************************************** */
/** \defgroup SAMD21G18A_port PORT Definitions */
/*@{*/
#include "pio_samd21g18a.h"
/*@}*/
/* ************************************************************************** */
/** MEMORY MAPPING DEFINITIONS FOR SAMD21G18A */
/* ************************************************************************** */
#define FLASH_SIZE 0x40000UL /* 256 kB */
#define FLASH_PAGE_SIZE 64
#define FLASH_NB_OF_PAGES 4096
#define FLASH_USER_PAGE_SIZE 64
#define HMCRAMC0_SIZE 0x8000UL /* 32 kB */
#define FLASH_ADDR (0x00000000UL) /**< FLASH base address */
#define FLASH_USER_PAGE_ADDR (0x00800000UL) /**< FLASH_USER_PAGE base address */
#define HMCRAMC0_ADDR (0x20000000UL) /**< HMCRAMC0 base address */
#define DSU_DID_RESETVALUE 0x10010005UL
#define EIC_EXTINT_NUM 16
#define PORT_GROUPS 2
/* ************************************************************************** */
/** ELECTRICAL DEFINITIONS FOR SAMD21G18A */
/* ************************************************************************** */
#ifdef __cplusplus
}
#endif
/*@}*/
#endif /* SAMD21G18A_H */
