File content as of revision 169:e3b6fe271b81:

/*******************************************************************************
 *Copyright (c) 2013-2016 Realtek Semiconductor Corp, All Rights Reserved
 * SPDX-License-Identifier: LicenseRef-PBL
 * 
 * Licensed under the Permissive Binary License, Version 1.0 (the "License"); 
 * you may not use this file except in compliance with the License.
 * 
 * You may obtain a copy of the License at https://www.mbed.com/licenses/PBL-1.0
 * 
 * See the License for the specific language governing permissions and limitations under the License.
 *******************************************************************************
 */
#ifndef _HAL_8195A_H_
#define _HAL_8195A_H_

#include "platform_autoconf.h"
#include "basic_types.h"
#include "section_config.h"
#include "rtl8195a_sys_on.h"
#include "rtl8195a_peri_on.h"
#include "hal_platform.h"
#include "hal_pinmux.h"
#include "hal_api.h"
#include "hal_peri_on.h"
#include "hal_misc.h"
#include "hal_irqn.h"
#include "hal_vector_table.h"
#include "hal_diag.h"
#include "hal_spi_flash.h"
#include "rtl8195a_spi_flash.h"
#include "hal_util.h"
#include "hal_efuse.h"
#include "hal_soc_ps_monitor.h"
#include "diag.h"


// from RDC team
#ifdef CONFIG_MBED_ENABLED
// Add for Mbed -OS
#include <stdint.h>
#include <stdbool.h>
#include <stddef.h>

#include "rtl8195a_compiler.h"
#include "rtl8195a_platform.h"



#define REG32(reg)      (*(volatile uint32_t *)(reg))
#define REG16(reg)      (*(volatile uint16_t *)(reg))
#define REG08(reg)      (*(volatile uint8_t  *)(reg))

#ifndef BIT
#define BIT(x)          (1 << (x))
#endif
#define ARRAY_SIZE(x)   (sizeof(x) / sizeof(*(x)))
#define ABS(x)          ((x > 0) ?  x : -x)
#define MAX(x,y)        ((x) < (y) ? (y) : (x))
#ifndef MIN
#define MIN(x,y)        ((x) > (y) ? (y) : (x))
#endif

#define __RTK_READ32(B,A)          (REG32((B) + (A)))
#define __RTK_READ16(B,A)          (REG16((B) + (A)))
#define __RTK_READ08(B,A)          (REG08((B) + (A)))
#define __RTK_WRITE32(B,A,V)       (REG32((B) + (A)) = (V))
#define __RTK_WRITE16(B,A,V)       (REG32((B) + (A)) = (V))
#define __RTK_WRITE08(B,A,V)       (REG32((B) + (A)) = (V))

#define __RTK_SETBIT(A,V)          (REG32(A) |= V)
#define __RTK_CLRBIT(A,V)          (REG32(A) &= ~V)
#define __RTK_SETMSK(A,M,V)        (REG32(A) = ((REG32(A) & (~M)) | V))

#define PERI_BASE	0x40000000

#define __BUILD_MACRO(name,ctrl)                                 \
static inline uint32_t                                           \
__##name##_READ32(uint32_t addr)                                 \
{                                                                \
    return __RTK_READ32(ctrl##_BASE,addr);                       \
}                                                                \
static inline uint16_t                                           \
__##name##_READ16(uint32_t addr)                                 \
{                                                                \
    return __RTK_READ16(ctrl##_BASE,addr);                       \
}                                                                \
static inline uint8_t                                            \
__##name##_READ08(uint32_t addr)                                 \
{                                                                \
    return __RTK_READ08(ctrl##_BASE,addr);                       \
}                                                                \
static inline void                                               \
__##name##_WRITE32(uint32_t addr, uint32_t val)                  \
{                                                                \
    __RTK_WRITE32(ctrl##_BASE,addr,val);                         \
}                                                                \
static inline void                                               \
__##name##_WRITE16(uint32_t addr, uint16_t val)                  \
{                                                                \
    __RTK_WRITE16(ctrl##_BASE,addr,val);                         \
}                                                                \
static inline void                                               \
__##name##_WRITE08(uint32_t addr, uint8_t val)                   \
{                                                                \
    __RTK_WRITE08(ctrl##_BASE,addr,val);                         \
}                                                                \
static inline void                                               \
__##name##_SETBIT(uint32_t addr, uint32_t val)                   \
{                                                                \
    __RTK_SETBIT(ctrl##_BASE+addr,val);                          \
}                                                                \
static inline void                                               \
__##name##_CLRBIT(uint32_t addr, uint32_t val)                   \
{                                                                \
    __RTK_CLRBIT(ctrl##_BASE+addr,val);                          \
}                                                                \
static inline void                                               \
__##name##_SETMSK(uint32_t addr, uint32_t msk, uint32_t val)     \
{                                                                \
    __RTK_SETMSK(ctrl##_BASE+addr,msk,val);                      \
}                                                                \

//__BUILD_MACRO(RTK_CTRL, CTRL)
//__BUILD_MACRO(RTK_PERI, PERI)
//__BUILD_MACRO(RTK_VENDOR, VENDOR)
//__BUILD_MACRO(RTK_SDRC, SDRC)

__BUILD_MACRO(RTK_CTRL, SYSTEM_CTRL)
__BUILD_MACRO(RTK_PERI, PERI)
__BUILD_MACRO(RTK_SDRC, SDR_CTRL)
__BUILD_MACRO(RTK_VENDOR, VENDOR_REG)


#define __BUILD_FCTRL_MACRO(name,ctrl)                           \
static inline void                                               \
__##name##_Enable(void)                                          \
{                                                                \
    __RTK_PERI_SETBIT(ctrl, BIT_FCTRL_##name);                   \
}                                                                \
static inline void                                               \
__##name##_Disable(void)                                         \
{                                                                \
    __RTK_READ32(name##_BASE, 0);                                \
    __RTK_PERI_CLRBIT(ctrl, BIT_FCTRL_##name);                   \
}



#include "rtl8195a_trap.h"
#include "rtl8195a_clk.h"
#include "rtl8195a_misc.h"
#include "rtl8195a_sdio.h"

#endif


/* ----------------------------------------------------------------------------
   -- Cortex M3 Core Configuration
   ---------------------------------------------------------------------------- */

/*!
 * @addtogroup Cortex_Core_Configuration Cortex M0 Core Configuration
 * @{
 */

#define __CM3_REV                      0x0200    /**< Core revision r0p0 */
#define __MPU_PRESENT                  1         /**< Defines if an MPU is present or not */
#define __NVIC_PRIO_BITS               4         /**< Number of priority bits implemented in the NVIC */
#define __Vendor_SysTickConfig         1         /**< Vendor specific implementation of SysTickConfig is defined */

#include "core_cm3.h"

#ifdef CONFIG_TIMER_EN
#include "hal_timer.h"
#endif

#ifdef CONFIG_GDMA_EN
#include "hal_gdma.h"
#include "rtl8195a_gdma.h"
#endif

#ifdef CONFIG_GPIO_EN
#include "hal_gpio.h"
#include "rtl8195a_gpio.h"
#endif

#ifdef CONFIG_SPI_COM_EN
#include "hal_ssi.h"
#include "rtl8195a_ssi.h"
#endif

#ifdef CONFIG_UART_EN
#include "hal_uart.h"
#include "rtl8195a_uart.h"
#endif

#ifdef CONFIG_I2C_EN
#include "hal_i2c.h"
#include "rtl8195a_i2c.h"
#endif


#ifdef CONFIG_PWM_EN
#include "hal_pwm.h"
#include "rtl8195a_pwm.h"
#endif

#ifdef CONFIG_I2S_EN
#include "hal_i2s.h"
#include "rtl8195a_i2s.h"
#endif

#ifdef CONFIG_DAC_EN
#include "hal_dac.h"
#include "rtl8195a_dac.h"
#endif

#ifdef CONFIG_ADC_EN
#include "hal_adc.h"
#include "rtl8195a_adc.h"
#endif

#ifdef CONFIG_SDR_EN
#endif

#ifdef CONFIG_SPIC_EN
#endif

#ifdef CONFIG_SDIO_DEVICE_EN
//#include "hal_sdio.h"
#endif

#ifdef CONFIG_NFC_EN
//#include "hal_nfc.h"
//#include "rtl8195a_nfc.h"
#endif

#ifdef CONFIG_WDG
#include "rtl8195a_wdt.h"
#endif

#ifdef CONFIG_USB_EN
//#include "hal_usb.h"
//#include "rtl8195a_usb.h"
#endif

#include "hal_log_uart.h"

#ifdef CONFIG_MII_EN
//#include "hal_mii.h"
//#include "rtl8195a_mii.h"
#endif

// firmware information, located at the header of Image2
#define FW_VERSION          (0x0100)
#define FW_SUBVERSION       (0x0001)
#define FW_CHIP_ID          (0x8195)
#define FW_CHIP_VER         (0x01)
#define FW_BUS_TYPE         (0x01)          // the iNIC firmware type: USB/SDIO
#define FW_INFO_RSV1        (0x00)          // the firmware information reserved
#define FW_INFO_RSV2        (0x00)          // the firmware information reserved
#define FW_INFO_RSV3        (0x00)          // the firmware information reserved
#define FW_INFO_RSV4        (0x00)          // the firmware information reserved

#define FLASH_RESERVED_DATA_BASE		0x8000  // reserve 32K for Image1
#define FLASH_SYSTEM_DATA_ADDR			0x9000  // reserve 32K+4K for Image1 + Reserved data
// Flash Map for Calibration data
#define FLASH_CAL_DATA_BASE				0xA000
#define FLASH_CAL_DATA_ADDR(_offset)	(FLASH_CAL_DATA_BASE + _offset)
#define FLASH_CAL_DATA_SIZE				0x1000
#define FLASH_SECTOR_SIZE				0x1000
// SPIC Calibration Data
#define FLASH_SPIC_PARA_OFFSET          0x80
#define FLASH_SPIC_PARA_BASE            (FLASH_SYSTEM_DATA_ADDR+FLASH_SPIC_PARA_OFFSET)
// SDRC Calibration Data
#define FLASH_SDRC_PARA_OFFSET          0x180
#define FLASH_SDRC_PARA_BASE            (FLASH_SYSTEM_DATA_ADDR+FLASH_SDRC_PARA_OFFSET)
// ADC Calibration Data
#define FLASH_ADC_PARA_OFFSET           0x200
#define FLASH_ADC_PARA_BASE             (FLASH_SYSTEM_DATA_ADDR+FLASH_ADC_PARA_OFFSET)

#endif //_HAL_8195A_H_