mbed official / mbed-dev

mbed library sources. Supersedes mbed-src.

Dependents:   Nucleo_Hello_Encoder BLE_iBeaconScan AM1805_DEMO DISCO-F429ZI_ExportTemplate1 ... more

targets/TARGET_Silicon_Labs/TARGET_EFM32/TARGET_EFM32PG/TARGET_EFM32PG_STK3401/PinNames.h@164:289d4deac6e4, 2017-05-10 (annotated)

Committer:
Anna Bridge
Date:
Wed May 10 12:06:41 2017 +0100
Revision:
164:289d4deac6e4
Parent:
153:fa9ff456f731 
This updates the lib to the mbed lib v142

Who changed what in which revision?

UserRevisionLine numberNew contents of line
<> 150:02e0a0aed4ec 1 /***************************************************************************//**
<> 150:02e0a0aed4ec 2 * @file PinNames.h
<> 150:02e0a0aed4ec 3 *******************************************************************************
<> 150:02e0a0aed4ec 4 * @section License
<> 150:02e0a0aed4ec 5 * <b>(C) Copyright 2015 Silicon Labs, http://www.silabs.com</b>
<> 150:02e0a0aed4ec 6 *******************************************************************************
<> 150:02e0a0aed4ec 7 *
<> 150:02e0a0aed4ec 8 * SPDX-License-Identifier: Apache-2.0
<> 150:02e0a0aed4ec 9 *
<> 150:02e0a0aed4ec 10 * Licensed under the Apache License, Version 2.0 (the "License"); you may
<> 150:02e0a0aed4ec 11 * not use this file except in compliance with the License.
<> 150:02e0a0aed4ec 12 * You may obtain a copy of the License at
<> 150:02e0a0aed4ec 13 *
<> 150:02e0a0aed4ec 14 * http://www.apache.org/licenses/LICENSE-2.0
<> 150:02e0a0aed4ec 15 *
<> 150:02e0a0aed4ec 16 * Unless required by applicable law or agreed to in writing, software
<> 150:02e0a0aed4ec 17 * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
<> 150:02e0a0aed4ec 18 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
<> 150:02e0a0aed4ec 19 * See the License for the specific language governing permissions and
<> 150:02e0a0aed4ec 20 * limitations under the License.
<> 150:02e0a0aed4ec 21 *
<> 150:02e0a0aed4ec 22 ******************************************************************************/
<> 150:02e0a0aed4ec 23 #ifndef MBED_PINNAMES_H
<> 150:02e0a0aed4ec 24 #define MBED_PINNAMES_H
<> 150:02e0a0aed4ec 25
<> 150:02e0a0aed4ec 26 #include "CommonPinNames.h"
<> 150:02e0a0aed4ec 27
<> 150:02e0a0aed4ec 28 #ifdef __cplusplus
<> 150:02e0a0aed4ec 29 extern "C" {
<> 150:02e0a0aed4ec 30 #endif
<> 150:02e0a0aed4ec 31
<> 150:02e0a0aed4ec 32 typedef enum {
<> 150:02e0a0aed4ec 33 EFM32_STANDARD_PIN_DEFINITIONS,
<> 150:02e0a0aed4ec 34
<> 150:02e0a0aed4ec 35 /* Starter Kit says LED0 and LED1, but mbed expects 1 and 2. This way using 1 and 2 or 0 and 1 will work. */
<> 150:02e0a0aed4ec 36 LED0 = PF4,
<> 150:02e0a0aed4ec 37 LED1 = PF5,
<> 150:02e0a0aed4ec 38 LED2 = LED0,
<> 150:02e0a0aed4ec 39 LED3 = LED0,
<> 150:02e0a0aed4ec 40 LED4 = LED1,
<> 150:02e0a0aed4ec 41
<> 150:02e0a0aed4ec 42 /* Push Buttons */
<> 150:02e0a0aed4ec 43 SW0 = PF6,
<> 150:02e0a0aed4ec 44 SW1 = PF7,
<> 150:02e0a0aed4ec 45 BTN0 = SW0,
<> 150:02e0a0aed4ec 46 BTN1 = SW1,
Anna Bridge 164:289d4deac6e4 47 // Standardized button names
Anna Bridge 164:289d4deac6e4 48 BUTTON1 = BTN0,
Anna Bridge 164:289d4deac6e4 49 BUTTON2 = BTN1,
<> 150:02e0a0aed4ec 50
<> 150:02e0a0aed4ec 51 /* Serial (just some usable pins) */
<> 150:02e0a0aed4ec 52 SERIAL_TX = PD10,
<> 150:02e0a0aed4ec 53 SERIAL_RX = PD11,
<> 150:02e0a0aed4ec 54
<> 150:02e0a0aed4ec 55 /* Board Controller UART (USB)*/
<> 150:02e0a0aed4ec 56 USBTX = PA0,
<> 150:02e0a0aed4ec 57 USBRX = PA1,
<> 150:02e0a0aed4ec 58
<> 150:02e0a0aed4ec 59 /* Board Controller */
<> 150:02e0a0aed4ec 60 STDIO_UART_TX = USBTX,
<> 153:fa9ff456f731 61 STDIO_UART_RX = USBRX
<> 150:02e0a0aed4ec 62 } PinName;
<> 150:02e0a0aed4ec 63
<> 150:02e0a0aed4ec 64 #ifdef __cplusplus
<> 150:02e0a0aed4ec 65 }
<> 150:02e0a0aed4ec 66 #endif
<> 150:02e0a0aed4ec 67
<> 150:02e0a0aed4ec 68 #endif