Sanjiv’s activity

item Answer posted for Question: Programming external target using silicon labs development kit: Your post does not offer many of the required details like what is your external target CPU, wiring diagram, source ...
item Answer posted for Question: how to use an arduino on APA102 sk9822? : https://github.com/pololu/apa102-arduino
item Answer posted for Question: reduce frequency depending on sampling rate of sensor: http://www.embedded.com/design/power-optimization/4237635/Understanding-MCU-sleep-modes-and-energy-savings This article is geared towards the EFM line of devices which is now Silabs but the concepts are still ...
item Answer posted for Question: I2C_SDA0 and I2C_SCL0: https://lancaster-university.github.io/microbit-docs/ubit/i2c/ {{/media/uploads/juthi/microbit_i2c.png}} Since the microbit board contains a few I2C devices already, this means the required pull-up resistors for proper ...
item Answer posted for Question: STM32F429ZI (master) to STM32F429ZI(slave) I2C protocol reg: Hi. A few pointers. 1) apply the <> your code <> markers when you post your source code so it ...
item Answer posted for Question: Trick to using SPI on MAX32630FTHR?: SPI line MISO is Master In Slave out and is usually linked with a CS (Chip select) on the mating ...
item Answer posted for Question: Nucleo-L476RG - Serial gets never return: Perhaps your clock change is impacting the UART baud rates ? Test to confirm that after your clock change that ...
item Question asked: I2CSlave mbed code review