Erik Olieman

Public repositories (41)


45 2186
MODSERIAL Featured
MODSERIAL with support for more devices
25 956
WakeUp Featured
Wake-up timer library to wake from deepsleep/power-down
33 2463
FastPWM Featured
Library that allows for higher resolution and speed than standard mbed PWM library using same syntax (drop-in replacement).
10 166
DMA library for the KL25Z
16 632
Library for reading temperature from DS1820, DS18B20 and DS1822
5 1492
DS1820 Hello World
13 85
Example of a Serial bootloader for the K64F platform
2 19
A software I2C interface which is a drop-in replacement for the regular mbed I2C interface in case you run out of I2C ports
23 576
Replacement for regular GPIO (DigitalIn, DigitalOut, DigitalInOut) classes which has superior speed.
12 586
Software serial, for when you are out of serial pins
13 1120
Class similar to AnalogIn that uses burst mode to run continious background conversions so when the input is read, the last value can immediatly be returned.
12 294
IAP code for Freescale platforms
2 21
Example code to create a heartbeat sensor using the Si1146 on Silicon Lab's Biometrics expansion board for the Wonder Gecko
1 23
Library for Si114x optical sensors. Currently intended for the Si1146, although it will work also for the Si1145, and without full functionality for the Si1147
14 559
Class to be able to send SPI data with almost no overhead, useful at very high speeds.
2 154
DS1302 Hello World program
6 178
RAMDisk example for the USBFileSystem
9 302
Class that combined FATFileSystem with a USBMSD device, similar to LocalFileSystem
2 36
Class similar to InterruptIn which allows the LPC1114 to wake from deepsleep. (For other targets you can use InterruptIn).
11 428
Inherit from SoftSerial and use software buffers for TX and RX. This allows the SoftSerial to operate in a IRQ driven mode. Overrides most (but not all) stdio functions as ...
5 135
Uses DMA to read/write SPI blocks, while putting the current thread in Wait state.
3 1985
Hello World program for MMA7660
5 2795
Library for the MMA7660 triple axis accelerometer
2 114
Library to make use of the DS1302 timekeeping IC. The functions are identical to those used by the mbed RTC's
11 1193
SCLD peripheral of the KL46Z
3 114
Simple helloworld program to show reduced overhead of SDFileSystem-RTOS
2 7
Never actually tested in practise
5 97
SDFileSystem which uses SimpleDMA to efficiently write to the SD card, while other Threads in the RTOS continue running
2 181
HelloWorld program showing SimpleDMA with mainly UART stuff
2 78
Example of using sleep/deepsleep with the LPC812
4 165
Helloworld program for the S25FL216K flash memory in combination with USBFileSystem
3 60
Implementation of a LocalFileSystem using S25FL216K serial flash memory. Currently only 256kB available!
1 15
SDFileSystem example for the Wi-Go2 module
2 48
Serial flash memory, binary access
31 124
MODSERIAL with support for KL25Z + RTOS (beta, putc + puts currently)
1 59
Simple clock program for LPC1768 Mini-DK
2 783
RTC
Allows easy usage of the LPC1768 RTC interrupts
3 1839
MPU6050 library that is kinda beta and will probably never leave beta but it might help some people.
2 34
Background calibration for magnetometers, both gain and offset errors are removed (hard/soft iron).
1 193
Interrupt based I2C functionality for the LPC1768. (If you want the other one, send a PM and I might make it). Also adds buffer functionality to the I2C bus.