Toyomasa Watarai
Describes predefine macros for mbed online compiler (armcc)
Diff: mbed/drivers/SerialBase.h
- Revision:
- 6:40e873bbc5f7
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/drivers/SerialBase.h Thu Mar 16 21:58:09 2017 +0900
@@ -0,0 +1,262 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_SERIALBASE_H
+#define MBED_SERIALBASE_H
+
+#include "platform/platform.h"
+
+#if DEVICE_SERIAL
+
+#include "Stream.h"
+#include "Callback.h"
+#include "serial_api.h"
+#include "mbed_toolchain.h"
+
+#if DEVICE_SERIAL_ASYNCH
+#include "CThunk.h"
+#include "dma_api.h"
+#endif
+
+namespace mbed {
+/** \addtogroup drivers */
+/** @{*/
+
+/** A base class for serial port implementations
+ * Can't be instantiated directly (use Serial or RawSerial)
+ *
+ * @Note Synchronization level: Set by subclass
+ */
+class SerialBase {
+
+public:
+ /** Set the baud rate of the serial port
+ *
+ * @param baudrate The baudrate of the serial port (default = 9600).
+ */
+ void baud(int baudrate);
+
+ enum Parity {
+ None = 0,
+ Odd,
+ Even,
+ Forced1,
+ Forced0
+ };
+
+ enum IrqType {
+ RxIrq = 0,
+ TxIrq,
+
+ IrqCnt
+ };
+
+ enum Flow {
+ Disabled = 0,
+ RTS,
+ CTS,
+ RTSCTS
+ };
+
+ /** Set the transmission format used by the serial port
+ *
+ * @param bits The number of bits in a word (5-8; default = 8)
+ * @param parity The parity used (SerialBase::None, SerialBase::Odd, SerialBase::Even, SerialBase::Forced1, SerialBase::Forced0; default = SerialBase::None)
+ * @param stop The number of stop bits (1 or 2; default = 1)
+ */
+ void format(int bits=8, Parity parity=SerialBase::None, int stop_bits=1);
+
+ /** Determine if there is a character available to read
+ *
+ * @returns
+ * 1 if there is a character available to read,
+ * 0 otherwise
+ */
+ int readable();
+
+ /** Determine if there is space available to write a character
+ *
+ * @returns
+ * 1 if there is space to write a character,
+ * 0 otherwise
+ */
+ int writeable();
+
+ /** Attach a function to call whenever a serial interrupt is generated
+ *
+ * @param func A pointer to a void function, or 0 to set as none
+ * @param type Which serial interrupt to attach the member function to (Seriall::RxIrq for receive, TxIrq for transmit buffer empty)
+ */
+ void attach(Callback<void()> func, IrqType type=RxIrq);
+
+ /** Attach a member function to call whenever a serial interrupt is generated
+ *
+ * @param obj pointer to the object to call the member function on
+ * @param method pointer to the member function to be called
+ * @param type Which serial interrupt to attach the member function to (Seriall::RxIrq for receive, TxIrq for transmit buffer empty)
+ * @deprecated
+ * The attach function does not support cv-qualifiers. Replaced by
+ * attach(callback(obj, method), type).
+ */
+ template<typename T>
+ MBED_DEPRECATED_SINCE("mbed-os-5.1",
+ "The attach function does not support cv-qualifiers. Replaced by "
+ "attach(callback(obj, method), type).")
+ void attach(T *obj, void (T::*method)(), IrqType type=RxIrq) {
+ attach(callback(obj, method), type);
+ }
+
+ /** Attach a member function to call whenever a serial interrupt is generated
+ *
+ * @param obj pointer to the object to call the member function on
+ * @param method pointer to the member function to be called
+ * @param type Which serial interrupt to attach the member function to (Seriall::RxIrq for receive, TxIrq for transmit buffer empty)
+ * @deprecated
+ * The attach function does not support cv-qualifiers. Replaced by
+ * attach(callback(obj, method), type).
+ */
+ template<typename T>
+ MBED_DEPRECATED_SINCE("mbed-os-5.1",
+ "The attach function does not support cv-qualifiers. Replaced by "
+ "attach(callback(obj, method), type).")
+ void attach(T *obj, void (*method)(T*), IrqType type=RxIrq) {
+ attach(callback(obj, method), type);
+ }
+
+ /** Generate a break condition on the serial line
+ */
+ void send_break();
+
+protected:
+
+ /** Acquire exclusive access to this serial port
+ */
+ virtual void lock(void);
+
+ /** Release exclusive access to this serial port
+ */
+ virtual void unlock(void);
+
+public:
+
+#if DEVICE_SERIAL_FC
+ /** Set the flow control type on the serial port
+ *
+ * @param type the flow control type (Disabled, RTS, CTS, RTSCTS)
+ * @param flow1 the first flow control pin (RTS for RTS or RTSCTS, CTS for CTS)
+ * @param flow2 the second flow control pin (CTS for RTSCTS)
+ */
+ void set_flow_control(Flow type, PinName flow1=NC, PinName flow2=NC);
+#endif
+
+ static void _irq_handler(uint32_t id, SerialIrq irq_type);
+
+#if DEVICE_SERIAL_ASYNCH
+
+ /** Begin asynchronous write using 8bit buffer. The completition invokes registered TX event callback
+ *
+ * @param buffer The buffer where received data will be stored
+ * @param length The buffer length in bytes
+ * @param callback The event callback function
+ * @param event The logical OR of TX events
+ */
+ int write(const uint8_t *buffer, int length, const event_callback_t& callback, int event = SERIAL_EVENT_TX_COMPLETE);
+
+ /** Begin asynchronous write using 16bit buffer. The completition invokes registered TX event callback
+ *
+ * @param buffer The buffer where received data will be stored
+ * @param length The buffer length in bytes
+ * @param callback The event callback function
+ * @param event The logical OR of TX events
+ */
+ int write(const uint16_t *buffer, int length, const event_callback_t& callback, int event = SERIAL_EVENT_TX_COMPLETE);
+
+ /** Abort the on-going write transfer
+ */
+ void abort_write();
+
+ /** Begin asynchronous reading using 8bit buffer. The completition invokes registred RX event callback.
+ *
+ * @param buffer The buffer where received data will be stored
+ * @param length The buffer length in bytes
+ * @param callback The event callback function
+ * @param event The logical OR of RX events
+ * @param char_match The matching character
+ */
+ int read(uint8_t *buffer, int length, const event_callback_t& callback, int event = SERIAL_EVENT_RX_COMPLETE, unsigned char char_match = SERIAL_RESERVED_CHAR_MATCH);
+
+ /** Begin asynchronous reading using 16bit buffer. The completition invokes registred RX event callback.
+ *
+ * @param buffer The buffer where received data will be stored
+ * @param length The buffer length in bytes
+ * @param callback The event callback function
+ * @param event The logical OR of RX events
+ * @param char_match The matching character
+ */
+ int read(uint16_t *buffer, int length, const event_callback_t& callback, int event = SERIAL_EVENT_RX_COMPLETE, unsigned char char_match = SERIAL_RESERVED_CHAR_MATCH);
+
+ /** Abort the on-going read transfer
+ */
+ void abort_read();
+
+ /** Configure DMA usage suggestion for non-blocking TX transfers
+ *
+ * @param usage The usage DMA hint for peripheral
+ * @return Zero if the usage was set, -1 if a transaction is on-going
+ */
+ int set_dma_usage_tx(DMAUsage usage);
+
+ /** Configure DMA usage suggestion for non-blocking RX transfers
+ *
+ * @param usage The usage DMA hint for peripheral
+ * @return Zero if the usage was set, -1 if a transaction is on-going
+ */
+ int set_dma_usage_rx(DMAUsage usage);
+
+protected:
+ void start_read(void *buffer, int buffer_size, char buffer_width, const event_callback_t& callback, int event, unsigned char char_match);
+ void start_write(const void *buffer, int buffer_size, char buffer_width, const event_callback_t& callback, int event);
+ void interrupt_handler_asynch(void);
+#endif
+
+protected:
+ SerialBase(PinName tx, PinName rx, int baud);
+ virtual ~SerialBase() {
+ }
+
+ int _base_getc();
+ int _base_putc(int c);
+
+#if DEVICE_SERIAL_ASYNCH
+ CThunk<SerialBase> _thunk_irq;
+ event_callback_t _tx_callback;
+ event_callback_t _rx_callback;
+ DMAUsage _tx_usage;
+ DMAUsage _rx_usage;
+#endif
+
+ serial_t _serial;
+ Callback<void()> _irq[IrqCnt];
+ int _baud;
+
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
+
+/** @}*/