File content as of revision 288:17565898c031:

/* mbed Microcontroller Library
 * Copyright (c) 2013 Nordic Semiconductor
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
// math.h required for floating point operations for baud rate calculation
//#include <math.h>
#include <string.h>
#include "mbed_assert.h"

#include "serial_api.h"
#include "cmsis.h"
#include "pinmap.h"

/******************************************************************************
 * INITIALIZATION
 ******************************************************************************/
#define UART_NUM    1

static uint32_t serial_irq_ids[UART_NUM] = {0};
static uart_irq_handler irq_handler;
static uint32_t acceptedSpeeds[16][2] = {{1200,UART_BAUDRATE_BAUDRATE_Baud1200},
                                         {2400,UART_BAUDRATE_BAUDRATE_Baud2400},
                                         {4800,UART_BAUDRATE_BAUDRATE_Baud4800},
                                         {9600,UART_BAUDRATE_BAUDRATE_Baud9600},
                                         {14400,UART_BAUDRATE_BAUDRATE_Baud14400},
                                         {19200,UART_BAUDRATE_BAUDRATE_Baud19200},
                                         {28800,UART_BAUDRATE_BAUDRATE_Baud28800},
                                         {38400,UART_BAUDRATE_BAUDRATE_Baud38400},
                                         {57600,UART_BAUDRATE_BAUDRATE_Baud57600},
                                         {76800,UART_BAUDRATE_BAUDRATE_Baud76800},
                                         {115200,UART_BAUDRATE_BAUDRATE_Baud115200},
                                         {230400,UART_BAUDRATE_BAUDRATE_Baud230400},
                                         {250000,UART_BAUDRATE_BAUDRATE_Baud250000},
                                         {460800,UART_BAUDRATE_BAUDRATE_Baud460800},
                                         {921600,UART_BAUDRATE_BAUDRATE_Baud921600},
                                         {1000000,UART_BAUDRATE_BAUDRATE_Baud1M}};

int stdio_uart_inited = 0;
serial_t stdio_uart;


void serial_init(serial_t *obj, PinName tx, PinName rx) {
    UARTName uart = UART_0;
    
    MBED_ASSERT((int)uart != NC);
    
    obj->uart = (NRF_UART_Type *)uart;
    
    //pin configurations --
    //outputs
    NRF_GPIO->DIR |= (1<<tx);//TX_PIN_NUMBER);
    NRF_GPIO->DIR |= (1<<RTS_PIN_NUMBER);

    NRF_GPIO->DIR &= ~(1<<rx);//RX_PIN_NUMBER);
    NRF_GPIO->DIR &= ~(1<<CTS_PIN_NUMBER);
    
    obj->uart->PSELRTS = RTS_PIN_NUMBER;
    obj->uart->PSELTXD = tx;//TX_PIN_NUMBER;
    
    //inputs
    obj->uart->PSELCTS = CTS_PIN_NUMBER;
    obj->uart->PSELRXD = rx;//RX_PIN_NUMBER;
    
    
    // set default baud rate and format
    serial_baud  (obj, 9600);
    serial_format(obj, 8, ParityNone, 1);
    
    obj->uart->ENABLE = (UART_ENABLE_ENABLE_Enabled << UART_ENABLE_ENABLE_Pos);;
    obj->uart->TASKS_STARTTX = 1;
    obj->uart->TASKS_STARTRX = 1;
    obj->uart->EVENTS_RXDRDY =0;
    
    obj->index = 0;
    
    // set rx/tx pins in PullUp mode
    pin_mode(tx, PullUp);
    pin_mode(rx, PullUp);
    
    if (uart == STDIO_UART) {
        stdio_uart_inited = 1;
        memcpy(&stdio_uart, obj, sizeof(serial_t));
    }
}

void serial_free(serial_t *obj) {
    serial_irq_ids[obj->index] = 0;
}

// serial_baud
// set the baud rate, taking in to account the current SystemFrequency
void serial_baud(serial_t *obj, int baudrate) {
    if(baudrate<=1200){
        obj->uart->BAUDRATE = UART_BAUDRATE_BAUDRATE_Baud1200;
        return;
    }
    
    for(int i=1;i<16;i++){
        if(baudrate<acceptedSpeeds[i][0]){
            obj->uart->BAUDRATE = acceptedSpeeds[i-1][1];
            return;
        }
    }
    obj->uart->BAUDRATE = UART_BAUDRATE_BAUDRATE_Baud1M;
}

void serial_format(serial_t *obj, int data_bits, SerialParity parity, int stop_bits) {
    // 0: 1 stop bits, 1: 2 stop bits
   // int parity_enable, parity_select;
    switch (parity) {
        case ParityNone:
            obj->uart->CONFIG  = 0;
        break;
        default:
            obj->uart->CONFIG  = (UART_CONFIG_PARITY_Included<<UART_CONFIG_PARITY_Pos);
            return;
    }
    //no Flow Control
}

//******************************************************************************
// * INTERRUPT HANDLING
//******************************************************************************
static inline void uart_irq(uint32_t iir, uint32_t index) {
    SerialIrq irq_type;
    switch (iir) {
        case 1:
            irq_type = TxIrq;
        break;
        case 2:
            irq_type = RxIrq;
        break;
        
        default: return;
    }
    
    if (serial_irq_ids[index] != 0){
        irq_handler(serial_irq_ids[index], irq_type);
    }
}
#ifdef __cplusplus
extern "C" {
#endif
void UART0_IRQHandler()
{
    uint32_t irtype =0;
    
    if(NRF_UART0->EVENTS_TXDRDY){
        irtype =1;
    }
    else if(NRF_UART0->EVENTS_RXDRDY){
        irtype =2;
    }
    uart_irq(irtype, 0);
}
#ifdef __cplusplus
}
#endif
void serial_irq_handler(serial_t *obj, uart_irq_handler handler, uint32_t id) {
    irq_handler = handler;
    serial_irq_ids[obj->index] = id;
}

void serial_irq_set(serial_t *obj, SerialIrq irq, uint32_t enable) {
    IRQn_Type irq_n = (IRQn_Type)0;

    switch ((int)obj->uart) {
        case UART_0: irq_n=UART0_IRQn ;
            break;
    }
    
    if (enable) {
        switch (irq) {
            case RxIrq: obj->uart->INTENSET |= (UART_INTENSET_RXDRDY_Msk);break;
            case TxIrq: obj->uart->INTENSET |= (UART_INTENSET_TXDRDY_Msk);break;
        }
        NVIC_SetPriority(irq_n, 3);
        NVIC_EnableIRQ(irq_n);
    }
    else { // disable
        int all_disabled = 0;
        switch (irq) {
            case RxIrq: obj->uart->INTENSET &= ~(UART_INTENSET_RXDRDY_Msk);
                        all_disabled = (obj->uart->INTENSET& (UART_INTENSET_TXDRDY_Msk))==0;
            break;
            case TxIrq: obj->uart->INTENSET &= ~(UART_INTENSET_TXDRDY_Msk);
                        all_disabled = (obj->uart->INTENSET& (UART_INTENSET_RXDRDY_Msk))==0;
            break;
        }
        
        if (all_disabled){
            NVIC_DisableIRQ(irq_n);
        }
    }
}

//******************************************************************************
//* READ/WRITE
//******************************************************************************
int serial_getc(serial_t *obj) {
    while (!serial_readable(obj));
    
    obj->uart->EVENTS_RXDRDY = 0;
    
    return (uint8_t)obj->uart->RXD;
}

void serial_putc(serial_t *obj, int c) {
    obj->uart->TXD = (uint8_t)c;
    
    while (!serial_writable(obj));
    
    obj->uart->EVENTS_TXDRDY =0;
}

int serial_readable(serial_t *obj) {
    return (obj->uart->EVENTS_RXDRDY == 1);
}

int serial_writable(serial_t *obj) {
    return (obj->uart->EVENTS_TXDRDY ==1);
}

void serial_break_set(serial_t *obj) {
    obj->uart->TASKS_SUSPEND = 1;
}

void serial_break_clear(serial_t *obj) {
    obj->uart->TASKS_STARTTX = 1;
    obj->uart->TASKS_STARTRX = 1;
}