WIZnet / Mbed 2 deprecated AnalogIn-HelloWorld_WIZwiki-W7500

AnalogIn-HelloWorld in WIZwiki-W7500

Dependencies:   mbed

Fork of AnalogIn-HelloWorld_WIZwiki-W7500 by WIZnet

Prerequisite

This Program is an example of how to get analog data with WIZwiki-W7500 board A0 Pin.

To implement this function, you need a Platform board only.

  • WIZwiki-W7500 from WIZnet (Platform board)

Hardware Configuration

WIZwiki-W7500 Pin map

pin map

Initialize an analog pin
Initialize an A0 pin of WIZwiki-W7100 platform as an analog pin.

Read analog data from analog pin
Connect an analog device, such as a variable resistor, to a0 pin. And read analog data.

Software

ADC Pin initialization

main.cpp

AnalogIn   ain(A0);

Read analog data and print to serial port

main.cpp

printf("percentage: %3.3f%%\n", ain.read()*100.0f);

main.cpp

Committer:
justinkim
Date:
2015-06-22
Revision:
3:c1650d8d13b4
Parent:
2:da2772e498bf

File content as of revision 3:c1650d8d13b4:

/* mbed Example Program
 * Copyright (c) 2006-2014 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
 
#include "mbed.h"

// Initialize a pins to perform analog input and digital output fucntions
AnalogIn   ain(A0);
DigitalOut dout(LED1);

int main(void)
{
    Serial pc(USBTX,USBRX);
    pc.baud(115200);
    while (1) {
        // test the voltage on the initialized analog pin
        //  and if greater than 0.3 * VCC set the digital pin
        //  to a logic 1 otherwise a logic 0
        if(ain > 0.3f) {
            dout = 1;
        } else {
            dout = 0;
        }
        
        // print the percentage and 16 bit normalized values
        printf("percentage: %3.3f%%\n", ain.read()*100.0f);
        printf("normalized: 0x%04X \n", ain.read_u16());
        wait(0.2f);
    }
}