ST
A world leader in providing the semiconductor solutions that make a positive contribution to people’s lives, both today and in the future.
You are viewing an older revision! See the latest version
SDK changes log
mbed library change log
http://developer.mbed.org/users/mbed_official/code/mbed/shortlog
mbed-os library releases
https://github.com/ARMmbed/mbed-os/releases
v140 - 17W15¶
(mbed-os 5.4.3)
NUCLEO_F303ZE
- Correct A0-A5 and D0-D1 pins definition
DISCO_L053C8, NUCLEO_L031K6/L053R8
- Decrease IAR heap/stack size
NUCLEO_L011K4
- Remove ARM_STD, GCC_ARM and IAR toolchains files (not supported)
NUCLEO_L476RG
- Add UART on PB_10/PB_11 pins
All STM32
- Fix in I2C slave address management
v139 - 17W13¶
(mbed-os 5.4.2)
NUCLEO_F439ZI
- Add mbedTLS
NUCLEO_F302R8
- Add PB_8/PB_9 pins for CAN
STM32F429/F439
- Set IAR heap to 64KB
STM32F7
- Update CubeF7 HAL driver to V1.2.0 30-Dec-2016
- Update CMSIS F7 driver to V1.2.0 30-Dec-2016
- Add missing initialization of TimMasterHandle.Init.AutoReloadPreload element in HAL_InitTick function
v138 - 17W11¶
(mbed-os 5.4.1)
NUCLEO_F103RB
- Fix issue with CAN_RD pin
STM32F429xx
- Fix startup issue for ARM and IAR (introduced by uVisor)
NUCLEO_F446ZE
- Add AnalogIn on PF_3/PF_5/PF_10 pins
STM32F746xG
- Increase heap size to 0x13000 for IAR
STM32L476xG
- Set APB2 clock to 80MHz (used by SPI)
All STM32
- Factorization of CAN and PWM files
- Factorization and improvement of GPIO
- Fix issues with RTC (weekday, rtc_isenabled)
- Fix issues with deepsleep (STM32L4)
v137 - 17W09¶
(mbed-os 5.3.6)
STM32F7
- Take into account 25MHz xtal -used by HSE_VALUE macro) on some boards.
STM32L4
- Add clearing of RTC_FLAG_WUTF flag in HAL_RTCEx_SetWakeUpTimer_IT() function (CubeL4 HAL driver).
All STM32
- Bug fix in spi_frequency() function
v136 - 17W07¶
(mbed-os 5.3.5)
NUCLEO_F207ZG
- Add definition of "Pxx_ALTn" pins
STM32L0
- Add LL Cube driver
All STM32
- Add i2c_sw_reset function for devices with I2C IP V2
- Reorganize targets folders
v135 - 17W05¶
STM32F3
- Update CubeF3 HAL driver to V1.4.0 16-Dec-2016
- Update CMSIS F3 driver to V2.3.1 16-Dec-2016
STM32F4
- Remove of HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4); in HAL_Init function.
DISCO_F429ZI
- Change GCC_ARM startup files (.s and .ld) and SystemInit function for uvisor.
STM32F7
- Update CubeF7 HAL driver to V1.1.2 23-Sep-2016
- Update CMSIS F7 driver to V1.1.2 23-Sep-2016
All STM32
- Fix bug in i2c_byte_read function.
v134 - 17W03¶
STM32F0
- Update CubeF0 HAL driver to V1.5.0 04-Nov-2016
- Update CMSIS F0 driver to V2.3.1 04-Nov-2016
All STM32
- Fix bugs in CAN
- Fix bug for F0 in HAL_InitTick function
- Fix bugs and add improvements for I2C
- Fix bug for L4 in deepsleep function
- Fix bug in spi_master_write function
v133 - 17W01¶
STM32F7
- Disable DCache for Ethernet (LWIP feature)
STM32F1
- Update CubeF1 HAL driver to V1.0.5 06-Dec-2016
- Clear flags in can_irq function
NUCLEO_F103RB
- Correct PC7/PWM, PB9/CANTD and PB8/CAN_RD pins configuration
All STM32
- Add call to MBED_ASSERT when USE_FULL_ASSERT macro is enabled in xxx_hal_conf.h file
- Improvement of I2C async functions
- Factorization of rtc_api and sleep files
v132 - 16W51¶
STM32F0
- Change ADC scan conversion mode to ADC_SCAN_DIRECTION_FORWARD instead of DISABLE
STM32F2/F3/F4/F7/L0/L4
- Changes in ST HAL i2c, usb and pcd files
STM32F4
- Changes in ST HAL dma files
- Fix problem with VBAT/VREF channels
STM32L0
- Changes in ST HAL spi and dma files
STM32L1
- Changes in ST HAL i2c and spi files
All STM32
- Fix issue with gpio_irq_free function
DISCO_F469NI
- Add missing CAN pins
NUCLEO_F412ZG
- Add new target
DISCO_L476VG
- Change stack/heap configuration for GCC and IAR
- Suppress start with external clock (MCO)
- Update SetSysClock_PLL_MSI function
NUCLEO_L476RG
- Suppress start with external clock (MCO)
- Update SetSysClock_PLL_MSI function
NUCLEO_L432KC
- Suppress start with external clock (MCO)
v131 - 16W50¶
NUCLEO_F103RB
- Add Serial Flow Control pins
v130 - 16W47¶
STM32F4
- Add I2C Async communication
STM32L0
- Update CubeL0 HAL driver to V1.7.0 31-May-2016
v129 - 16W45¶
All STM32
- Change GCC_ARM init sequence in startup_xxx.s file
STM32F0
- Fix issue in CAN filter function
NUCLEO_F072RB
- Correction on PB_5/PWM pin (channel 2 used)
v128 - 16W43¶
STM32F0
- Add Serial Flow Control
STM32F1
- Fix issue with us_ticker
STM32F4
- Remove the previous byte transfer wait in i2c_stop function
- Add LowPower Ticker with RTC
All STM32
- Fix issue with GPIO mode configuration
- Add ADC internal channels
- Remove the call to HAL_Init() in mbed_sdk_init() for GCC_ARM compiler
v127 - 16W39¶
NUCLEO_F303ZE
- Change initial SP to 0x20010000 (instead of 0x20004000) for ARM_STD compiler
STM32F4
- Changes in stm32f4xx_hal_i2c.c !!! Functions I2C_MasterReceive_RXNE and I2C_MasterReceive_BTF.
- Changes in stm32f4xx_hal_spi.c !!! Functions SPI_TxISR_8BIT and SPI_TxISR_16BIT.
STM32F0
- Add ADC internal channels
- Add LowPower Ticker with RTC
- Add Serial Async
STM32F3
- Add Serial Flow Control
- Add LowPower Ticker with RTC
STM32F4
- Add SPI Async
- Add I2C Async
STM32F7
- Add LowPower Ticker with RTC
- Add Serial Async
STM32L0
- Add Serial Flow Control
- Add LowPower Ticker with RTC
- Add Serial Async
STM32L1
- Add Serial Flow Control
- Add LowPower Ticker with RTC
STM32L4
- Add LowPower Ticker with RTC
v126 - 16W37¶
NUCLEO_F303ZE
- Add new target
DISCO_F769NI
- Add new target (done by Community)
STM32F1
- Add Serial Async mode and Serial Flow Control
STM32F4
- Add ADC internal channels
DISCO_L476VG
- Add Serial Flow Control pins
v125 - 16W35¶
STM32F3/L1/L4/NUCLEO_F207ZG
- Add Serial Async and Hardware Flow Control
STM32F4/F7
- Add entropy hardware poll
v124 - 16W33¶
STM32F0/F1
- Add macro STM_PIN_DATA_EXT to facilitate pinout configuration (analog_in/out, pwmout)
STM32F1
- Fix bug with ADC external trigger conversion (use software start)
DISCO_F429ZI/F469NI, NUCLEO_F410RB/F411RE/F429ZI/F446RE
- Add Serial Flow Control pins
STM32F4
- Update Serial Async mode. Remove the DMA transfer.
DISCO_L476VG
- Add more SPI_2 pins
v123 - 16W32¶
STM32F0/F1/F3/F4/F7/L0/L1/L4
- Change timer flags management in hal_tick.c
STM32F0/F1/F4/F7/L0/L1/L4
- Increase PWM period
STM32F0/F1/F3/F7/L0/L1/L4
- Update RTC date format
STM32F4/F7/L1/L4
- Replace TXE by TC flag for Serial
STM32F3
- Update STM32Cube HAL driver to V1.3.0
NUCLEO_F207ZG
- Add new target
v122 - 16W30¶
STM32F0
- Update STM32Cube CMSIS driver to V2.3.0 and HAL driver to V1.4.0
- Add LowPower Ticker
NUCLEO_F030R8/F070RB/F103RB, DISCO_F100RB
- Update hal_tick.c
STM32F1
- Add CAN
- Fix bug in GPIO PU/PD configuration
- Improve SPI
STM32F3
- Update STM32Cube CMSIS driver to V2.3.0 and HAL driver to V1.2.1
- Add CAN
- Improve SERIAL and SPI
STM32F4
- Update STM32Cube CMSIS driver to V2.5.0 and HAL driver to V1.5.0
- Improve SERIAL Async and SPI
STM32F7
- Update STM32Cube CMSIS driver to V1.1.0 and HAL driver to V1.1.0
- Add CAN
- Improve SERIAL Async and SPI
STM32L0
- Improve usticker, SERIAL and SPI
STM32L1
- Update STM32Cube CMSIS driver to V2.1.3 and HAL driver to V1.1.3
- Improve RTC, SERIAL and SPI
STM32L4
- Update STM32Cube CMSIS driver to V1.1.1 and HAL driver to V1.5.1
- Add CAN
- Improve RTC, SERIAL and SPI
NUCLEO_F429ZI/F446ZE/F767ZI/L011K4/L432KC
- Add new targets
v121 - 16W21¶
STM32F0/F1
- Add fix for 16-bit timer (Issue #816) - differ from L0
STM32F1/F4
- Add USART reset during instance initialization
STM32F4
- Set initial CAN freq to 100kb/s
STM32F7
- Fix issue with ADC end of conversion
STM32L0
- Add fix for 16-bit timer (Issue #816) - differ from F0/F1
NUCLEO_F031K6
- Add PA_3 pin for Serial Rx
NUCLEO_F042K6/F072RB/F091RC
- Add CAN api
v120 - 16W19¶
STM32F1
- Update STM32CubeF1 HAL driver from V1.0.0/15-December-2014 to V1.0.4/29-April-2016
DISCO_L476VG/NUCLEO_L476RG
- Increase heap size from 32kb to 96kb for ARM_MICRO compiler
DISCO_L476VG
- Move stack/heap in 0x20000000-0x20017FFF memory area (SRAM1) for IAR compiler
STM32F3
- Increase PWM period (up to 32.76 s)
STM32F4
- Add different CAN filter for CAN1 and CAN2
NUCLEO_L031K6
- Change PWM_OUT pin value (PB_0 instead of PB_3)
v119 - 16W17¶
STM32L0
- CubeL0 HAL driver updated to V1.5.0 08-JAN-2016
- Update in rtc_api.c concerning backup registers clock
STM32F4/F7
- Utility function HAL_Delay redefined in mbed_overrides.c file.
NUCLEO_L476RG
- Add Serial Flow Control (#define DEVICE_SERIAL_FC) feature
NUCLEO_L031K6
- New target added
v118 - 16W15¶
STM32F0/F1/F3/L1
- Increase LSE startup timeout to 5 sec
STM32F0/F1/F3/F7/L1
- Remove automatic RTC LSE/LSI clock switching
- Add "#define DEVICE_RTC_LSI" option
NUCLEO_F401RE
- Add Serial Flow Control feature ("#define DEVICE_SERIAL_FC 1" added in device.h)
STM32F0/F1/F3/F4/F7/L0/L1/L4
- Remove the RCC backup registers reset when LSE clock is used
v117 - 16W13¶
NUCLEO_F303K8
- Fix issue with number of interrupt vectors (98 instead of 101)
DISCO_L476VG/NUCLEO_L476RG
- Update startup file to better manage the stack/heap. Heap size increased.
STM32L0/STM32L4
- Increase LSE startup timeout to 5 sec
STM32F4
- Fix bug in serial_api.c concerning usage of TXE flag instead of TC
STM32L0
- Remove automatic RTC LSE/LSI clock switching
- Add "#define DEVICE_RTC_LSI" option
v116 - 16W11¶
STM32F3
- Fix issue with ADC clock setting whith multiple ADC instances
STM32F4
- Increase LSE startup timeout to 5 sec
- Remove usage of LSI clock for RTC per default
- Add "#define DEVICE_RTC_LSI" option
- Add handling of UART ORE flag
STM32F7
- Update STM32CubeF7 HAL driver to V1.0.4 09-December-2015
NUCLEO_L476RG
- Add "#define DEVICE_RTC_LSI" option
v115 - 16W09¶
NUCLEO_F746ZG
- Add target
DISCO_L476VG/NUCLEO_L476RG
- Fix bug with wrong definition of NVIC_RAM_VECTOR_ADDRESS
- Increase LSE timeout to 5 seconds
- Remove usage of LSI clock for RTC per default
B96B_F446VE
- Add support of CAN peripheral api
- Add support of Serial asynchronous mode with/without DMA
STM32F4
- Add Serial asynchronous mode with/without DMA (only activated on B96B_F446VE)
v114 - 16W07¶
B96B_F446VE
- Add serial hardware flow control
ALL platforms
- Add SW4STM32 toolchain exporter
v113 - 16W05¶
STM32F0
- Fill all RCC_OscInitStruct fields in SetSysClock_xxx functions
B96B_F446VE
- Add DEVICE_SERIAL_ASYNCH and DEVICE_SERIAL_ASYNCH_DMA modes for this target only
STM32F4
- Add code for DEVICE_SERIAL_ASYNCH and DEVICE_SERIAL_ASYNCH_DMA modes
v112 - 16W02¶
STM32F0
- Correct NVIC_SetVector function with the use of SYSCFG_CFGR1 register
- Correct SystemInit function with call to HAL_Init and SetSysClock functions
- Change in mbed_sdk_init function
ALL except STM32F1
- Fix RTC problem during init phase
B96B_F446VE
- Add target
v111 - 15W51¶
NUCLEO_F030R8
- Add correction in HAL_InitTick function
NUCLEO_F031K6/F042K6/F303K8
- Remove start with external clock
ALL
- Decrease HSE, HSI and LSE startup timeouts
- Fix potential issue on I2C with start/stop conditions
ALL except STM32F1
- Add check of RTC INITS flag during init phase
STM32L1
- Add clear of UART ORE flag
v110 - 15W48¶
DISCO_F429ZI
- Add target
DISCO_F469NI
- Add target
NUCLEO_F410RB
- Add target
STM32F4
- Decrease HSE timeout to 200ms
- Update STM32F4xx HAL driver to V1.4.1
NUCLEO_L476RG
- Change in the SRAM1/SRAM2 memory placement for IAR
v109 - 15W44¶
NUCLEO_F031K6
- Add HSI calibration
STM32F0
- Decrease LSE timeout to 500ms
- Fix issue with DAC 16-bits normalized value
STM32F3
- Fix issue with DAC 16-bits normalized value
STM32F4
- Fix issue with DAC 16-bits normalized value
- Fix issue with potential pending STOP before START
STM32F7
- Fix issue with DAC 16-bits normalized value
- Fix issues in RTC: init flag and in rtc_write function
STM32L0
- Fix issue with DAC 16-bits normalized value
STM32L1
- Fix issue with DAC 16-bits normalized value
STM32L4
- Fix issue with DAC 16-bits normalized value
NUCLEO_F042K6
- Add target (beta)
NUCLEO_F303K8
- Add target (beta)
v108 - 15W40¶
STM32F0xx
- Update STM32CubeF0 hal driver to V1.3.0
- Update STM32CubeF4 cmsis device driver to V2.2.2
NUCLEO_F031K6
- Add target (beta)
NUCLEO_L476RG and DISCO_L476VG
- Change stack/heap placement in SRAM1 and SRAM2 for ARM_MICRO, ARM_STD, IAR, GCC
v107 - 15W38¶
NUCLEO_L476RG
- Add target
v106 - 15W36¶
NUCLEO_F446RE
- Add target
STM32F4
- Update STM32CubeF4 hal driver to V1.3.2
- Update STM32CubeF4 cmsis device driver to V2.3.2
v105 - 15W34¶
DISCO_F746NG
- Update Cube driver
- Update Pinout and PwmOut files
DISCO_L476VG
- Add target
v104 - 15W32¶
DISCO_F746NG
- Fix in pwmout
- Add IAR exporter template
v103 - 15W30¶
- No change
v102 - 15W28¶
NUCLEO_F030R8, NUCLEO_F070RB
- Fix startup file + Remove the call to Systick (mbed RTOS compliancy)
DISCO_F746NG
- Add target
v101 - 15W24¶
All targets
- Update SPI NSS pin configuration
STM32F4
- Fix issue with PWM clock configuration
NUCLEO_F103RB, NUCLEO_L152RE
- Fix startup file for mbed RTOS
NUCLEO_F446RE
- Add target
v100 - 15W22¶
STM32F3 targets
- Refactor analogin and pwmout api files
- Add new macro STM_PIN_DATA_EXT to facilitate pinout configuration (analog_in/out, pwmout)
DISCO_F334C8
- Add target
v99 - 15W20¶
STM32F4
- Update STM32Cube driver to v1.3.0
- Update GPIO set/clr registers setting
NUCLEO_F103RB
- Fix bug with GPIO pullup/down setting
STM32L0
- Add new macro STM_PIN_DATA_EXT to facilitate pinout configuration (analog_in/out, pwmout)
DISCO_L053C8
- Add target
v98 - 15W18¶
STM32F0 targets
- Fix issue with SystemCoreClock variable during initialization phase
STM32F1, F3, F4, L0 targets
- Fix issue with constant tables when
__IO
or__I
is used
NUCLEO_F411RE
- Change system clock to 96 MHz (instead of 100 MHz) to allow USB clock equals to 48 MHz
STM32F4, L0, L1
- Increase LSE start timeout to 5 s (instead of 500 ms)
v97 - 15W16¶
- Reorganization of STM32L1, STM32F1, STM32F3 and STM32F4 hal folders
- Improvement of PeripheralPins.c file for STM32F4 targets
v96 - 15W12¶
NUCLEO_F103RB
- Porting to STM32Cube driver
NUCLEO_L053R8
- cmsis and hal folders refactoring
- Update STM32Cube driver to v1.2.0
v95 - 15W10¶
Several NUCLEO platforms
- Correction of IAR stack (1/8 RAM) and heap (1/4 RAM) sizes
v94 - 15W08¶
- No change
v93 - 15W06¶
New platforms added
- NUCLEO_F303RE and NUCLEO_F070RB
NUCLEO_F0xx
- Update STM32Cube driver to v1.2.0
v92 - 14W48¶
All NUCLEO SDKs
- InterruptIn: Multiple pins can now be used on the same EXTI line
v91 - 14W44¶
- No change
v90 - 14W44¶
NUCLEO_F030R8
- Porting to STM32Cube driver
- InterruptIn: Fix bug when IRQ edges are disabled
NUCLEO_F072RB
- InterruptIn: Fix bug when IRQ edges are disabled
- SPI: Fix bug with 8-bit data write/read
NUCLEO_F091RC
- New target added
- Use STM32Cube driver
NUCLEO_F103RB
- InterruptIn: Fix bug when IRQ edges are disabled
NUCLEO_F302R8
- Porting to STM32Cube driver
- InterruptIn: Fix bug when IRQ edges are disabled
- AnalogIn: Increase sampling time
- Remove the call to Systick for Cube HAL (compliant with mbed RTOS)
NUCLEO_F334R8
- InterruptIn: Fix bug when IRQ edges are disabled
- AnalogIn: Increase sampling time
NUCLEO_F401RE
- InterruptIn: Fix bug when IRQ edges are disabled
- Update STM32Cube driver version
NUCLEO_F411RE
- InterruptIn: Fix bug when IRQ edges are disabled
- Update STM32Cube driver version
NUCLEO_L053R8
- InterruptIn: Fix bug when IRQ edges are disabled
- AnalogIn: Increase sampling time
NUCLEO_L152RE
- Porting to STM32Cube driver
- InterruptIn: Fix bug when IRQ edges are disabled
- AnalogIn: Increase sampling time
v89 - 14W37¶
All NUCLEO SDKs
- Set heap size to 0x400 and set heap limit for uARM toolchain
- Fix bug with analogin_read_u16 function return value
- Fix bug with multiple I2C slave devices
NUCLEO_F072RB/F334R8/L053R8
- Fix bug with Serial (causing wrong communication with some shields only)
v88 - 14W33¶
NUCLEO_F334R8
- I2C: Fix bug with wrong clock selection
v87 - 14W30¶
NUCLEO_F401RE
- HEAP added on ARM_MICRO and GCC_ARM compilers
v86 - 14W27¶
General
- Add NUCLEO_F072RB, NUCLEO_F334R8, NUCLEO_F411RE and NUCLEO_L053R8 SDKs
All NUCLEO SDKs
- Add mbed assert
- I2C: Fix bug with I2C EEPROM communication
- Serial: Set 8bit data as default value
- SPI: Set 8bit data as default value
NUCLEO_F030R8
- Serial: Add Tx only and Rx only modes
- SPI: Fix bug with wrong configuration of NSS pin
NUCLEO_F103RB
- Serial: Add Tx only and Rx only modes
NUCLEO_F302R8
- Serial: Add Tx only and Rx only modes
NUCLEO_F401RE
- Serial: Add Tx only and Rx only modes
- SPI: Fix bug with wrong configuration of NSS pin
- Sleep: Disable HAL tick before entering in sleep mode
NUCLEO_L152RE
- Serial: Add Tx only and Rx only modes
v85 - 14W24¶
All NUCLEO SDKs
- Improve "xxx_free" functions (spi, serial, rtc, pwm)
NUCLEO_F401RE
- Remove the usage of Systick and use a standard timer instead for HAL driver timeouts
- Update Cube HAL driver to V1.1.0RC2
- Correct PWM channel number on PA_3
v84 - 14W21¶
NUCLEO_F030R8
- Add SPI slave and I2C slave
- Change PWM channel number for PA_7
NUCLEO_F103RB
- Add SPI slave and I2C slave
- Add LSE clock configuration for RTC
NUCLEO_F302R8
- Add SPI slave and I2C slave
NUCLEO_F401RE
- Add automatic clock configuration between external clock, xtal and device internal clock
- system clock = 84 MHz for all modes
- Add SPI slave and I2C slave
- Add PA_7 pin for ADC input
NUCLEO_L152RE
- Add SPI slave and I2C slave
- Add LSE clock configuration for RTC
v83 - 14W18¶
NUCLEO_F030R8
- Add automatic clock configuration between external clock, xtal and device internal clock
- system clock = 48 MHz for all modes
- Add all possible pins for ADC, InterruptIn, I2C, PWM, UART, SPI
- Add LSE clock configuration for RTC
NUCLEO_F103RB
- Add all possible pins for ADC, InterruptIn, I2C, PWM, UART
- Change the timer used for the us_ticker (TIM4 instead of TIM1)
NUCLEO_F302R8
- Add this new platform
- system clock = 72 MHz for external clock/xtal and 64 MHz for internal clock
NUCLEO_F401RE
- Add LSE clock configuration for RTC
NUCLEO_L152RE
- Add all possible pins for InterruptIn
v82 - 14W15¶
NUCLEO_F103RB
- Add automatic clock switching between external clock, xtal and device internal clock
- system clock = 72 MHz for external clock/xtal and 64 MHz for internal clock
- Add all possible pins for SPI
NUCLEO_F401RE
- Fix issue with PWM_OUT on PC_9 pin
NUCLEO_L152RE
- Add automatic clock switching between external clock, xtal and device internal clock
- system clock = 24 MHz for external clock/xtal (to obtain USB 48 MHz clock) and 32 MHz for internal clock
- Add all possible pins for ADC, DAC, PWM, UART
v81 - 14W12¶
NUCLEO_F030R8
- Fix issue with SPI 16-bit data
NUCLEO_F401RE
- Set system clock to 84 MHz with PLL(HSI)
- Add all possible pins for ADC, InterruptIn, I2C, PWM, UART, SPI
- Fix issue with SPI 16-bit data
NUCLEO_L152RE
- Add all possible pins for I2C, UART, SPI
v80 - 14W08¶
- No change
v79 - 14W08¶
NUCLEO_F030R8
- Fix issue with us_ticker
NUCLEO_F103RB
- Fix issue with us_ticker
NUCLEO_F401RE
- Improve sleep and us_ticker
NUCLEO_L152RE
- Improve sleep and us_ticker
v78 - 14W08¶
- No change
v77 - 14W07¶
- Add NUCLEO_F030R8, NUCLEO_F401RE, NUCLEO_F103RB, NUCLEO_L152RE SDKs