WIZwiki-W7500P

WIZwiki-W7500P is a SoC platform board based on the W7500P chip = ARM Cortex-M0 that integrates 128KB Flash and hardwired TCP/IP core and MacPhy. If you use WIZwiki-W7500 board, you can easily evaluate the W7500 and test its performance and all functions.

Overview

WIZnet WIZwiki Platform based on WIZnet's W7500P MCU. The IOP4IoT "Internet Offload Platform for IoT" W7500P chip is the SoC one-chip solution which integrates an ARM Cortex-M0, 128KB Flash and hardwired TCP/IP core & Ethernet PHY for various embedded application especially for Internet of things and Gateways. The TCP/IP core is a market-proven hardwired TCP/IP stack. If you use WIZwiki-W7500P you will be able to easily develop a prototype. It can be used as an Arduino shield because its Arduino pin Compatible. This is using the CMSIS-DAP USB and ISP Header for easy firmware writing in the mbed.org compiler environment.

Features

Hand Book

Information

Welcome!! HANDBOOK PAGE LINK

Welcome!! COMPONENT PAGE LINK

basic examples & components example & application examples in this page Example is verified by WIZwiki-W7500P

/media/uploads/justinkim/component.png

Pinout

WIZwiki-W7500P detail Pinout /media/uploads/justinkim/wizwiki_w7500p_pinout_mbed_150907.png

Available Pin Name at mbed

Note

Only the labels written must be used in your code. The other labels are given as information (alternate-functions, power pins, ...). You can also use these additional labels:

PA_0, PA_1, PA_2, PA_3, PA_4, PA_5, PA_6, PA_7, PA_8, PA_9, PA_10, PA_11, PA_12, PA_13, PA_14

PA_00, PA_01, PA_02, PA_03, PA_04, PA_05, PA_06, PA_07, PA_08, PA_09

PB_0, PB_1, PB_2, PB_3

PB_00, PB_01, PB_02, PB_03

PC_0, PC_1, PC_2, PC_3, PC_4, PC_5, PC_6, PC_8, PC_9, PC_10, PC_11, PC_12, PC_13, PC_14, PC_15

PC_00, PC_01, PC_02, PC_03, PC_04, PC_05, PC_06, PC_08, PC_09

A0 = PC_15, A1 = PC_14, A2 = PC_13, A3 = PC_12, A4 = PC_11, A5 = PC_10, A6 = PC_9, A7 = PC_8

D0 = PA_14, D1 = PA_13, D2 = PC_3, D3 = PC_2, D4 = PA_2, D5 = PA_1, D6 = PA_0, D7 = PA_12, D8 = PA_11, D9 = PC_1, D10 = PA_5, D11 = PA_8, D12 = PA_7, D13 = PA_6, D14 = PA_10, D15 = PA_9

LED_RED = PC_0, LED_GREEN = PC_4, LED_BLUE = PC_5

LED1 = LED_RED, LED2 = LED_GREEN, LED3 = LED_BLUE, LED4 = LED_BLUE

LEDR = LED_RED, LEDG = LED_GREEN, LEDB = LED_BLUE

USBTX = PC_10, USBRX = PC_11

SD_SEL = PB_0, SD_CLK = PB_1, SD_MISO = PB_2, SD_MOSI = PB_3

Getting Started

Update or Restore Firmware

Resources

 Buy Now


Please log in to start a discussion or ask a question.

Questions