Seeed Arch BLE

Arch BLE is an mbed enabled development board based Nordic nRF51822. With Arduino form factor and Grove connectors, it is extremely easy to create a bluetooth low energy device.

Pinout

/media/uploads/yihui/arch_ble_pinout.png

Features

  • mbed enabled
    • Online IDE
    • Easy to use C/C++ SDK
    • Handy libraries
  • CMSIS DAP based on LPC11U35
    • Drag-n-drop programming
    • Debug using CMSIS DAP standard
    • USB virtual serial for communication
  • Arduino form factor with Grove connectors
  • Nordic nRF51822 Multi-protocol Bluetooth® 4.0 low energy/2.4GHz RF SoC
    • ARM Cortex M0 processor
    • 128kB flash/16kB RAM
    • Configurable I/O mapping for digital I/O
  • USB Micro B connector

Get Started

  1. Click this link to import the mbed_blinky program
  2. compile and download the compiled hex file
  3. Drag-n-drop the compiled hex file into the MBED disk

Firmware Update

The latest Arm Mbed DAPLink interface firmware for the Seeed Arch BLE is available at (click the image):

DAPLink firmware for Seeed Arch BLE

Source: https://github.com/ARMmbed/DAPLink

 Buy Now