NuMaker-PFM-NUC472

The NuMaker Platform is an Internet of Things (IoT) application focused platform specially developed by Nuvoton. It supports ARM mbed OS 5.0 as well as Arduino interface, and is ideal for arrays of IoT application development for prototype development designs with sensors and wireless modules.

The NuMaker-PFM-NUC472 is also equipped with plenty of peripheral devices, such as timers, watchdog timers, RTC, PDMA, EBI, UART, smart card interface, SD host, SPI, I²C, I²S, PWM, GPIO, LIN, CAN, PS/2, 12-bit ADC, analog comparator, operational amplifier, temperature sensor, low voltage reset controller and brown-out detector.

The NuMaker-PFM-NUC472 also provides Ethernet 10/100 MAC with MII and RMII interface, USB 2.0 FS device/host/OTG, USB 2.0 HS device and security functions such as tamper detection, symmetric cryptographic accelerator and secure Hash function accelerator.

The NuMaker-PFM-NUC472 has been designed by Nuvoton in collaboration with mbed for prototyping all sorts of devices, especially those requiring the size and excellent price performance ratio offered by Cortex-M4®. It is packaged as a development board with connectors to break out to strip board and breadboard.

/media/platforms/NuMaker_NUC472_Board_pinout_new.png /media/uploads/nuvoton/01.png /media/uploads/nuvoton/02.png /media/uploads/nuvoton/03.png

NuMaker-PFM-NUC472 Platform Features

On-board peripherals

Debugging

Windows serial port driver

ICE firmware

DAP Link Interface Firmware Update

The Nuvoton mbed PFM boards is fitted with an NUC12SRE3DE MCU running the DAPLink interface firmware to provide three main functions over a single physical USB connection.

Firmware History

2017-01-11 Download the one-click firmware update package. Fixes issues with Windows 8.1 / Windows 10 / Linux / MacOS.

Upgrade Procedure

Location of MASS jumper on NuMaker-NUC472-PFM board:

/media/uploads/nuvoton/mass-jumper-numaker-pfm-nuc472.jpg

  1. Download the one-click firmware update package.
  2. Remove MASS jumper.
  3. Connect the USB port to Windows PC.
  4. Extract the downloaded package to a directory then open the directory.
  5. Click update.bat to execute the batch file. A new DOS window will open and update the firmware automatically.
  6. When done, press a key to exit the window. /media/uploads/nuvoton/firmware_update.png
  7. Un-plug the USB cable and install the MASS jumper.
  8. Done.

If you have any question, please visit NuForum

 Buy Now


Please log in to start a discussion or ask a question.

Discussion topics

TopicRepliesLast post
Where to buy? 1 18 Aug 2016 by nuvoton Admin

Questions