FRDM-KL05Z

The FRDM-KL05Z is an ultra-low-cost development platform enabled by the Kinetis L Series KL0x MCU family built on the ARM® Cortex™-M0+ processor. Features include easy access to MCU I/O, battery-ready, low-power operation, a standard-based form factor with expansion board options and a built-in debug interface for flash programming and run-control. The FRDM-KL05Z is supported by a range of NXP and third-party development software.

Overview

The FRDM-KL05Z has been designed by NXP in collaboration with mbed for prototyping all sorts of devices, especially those requiring the size and price point offered by Cortex-M0+. It is packaged as a development board with connectors to break out to strip board and breadboard, and includes a built-in USB FLASH programmer.

/media/uploads/GregC/frdm-kl05z_headers.png

Important Notes

Please note that on this MCU in SPI Slave mode pins labeled MOSI behave as Slave Output and pins labeled MISO behave as Slave Input. The terms MOSI (Master Out Slave In) and MISO (Master In Slave Out) only apply to Master mode.

It is based on the NXP KL05Z, with a 32-bit ARM Cortex-M0+ core running at 48MHz. It includes 32KB FLASH, 4KB RAM and lots of interfaces including SPI, I2C, ADC, DAC, PWM, Touch Sensor and other I/O interfaces.

/media/uploads/GregC/frdm-kl05z_peripherals.png

The FRDM-KL05Z is fully supported in the mbed platform, so it gets access to the free tools and SDK that provides experienced embedded developers with powerful and productive tools for building proof-of-concepts. The pinout above shows the commonly used interfaces and their locations. Note that all the numbered pins (PT_XX) can also be used as DigitalIn and DigitalOut interfaces.

Pin names



Features

  • NXP KL05Z Kinetis KL4 MCU (MKL05Z32VFM4)
    • High performance ARM® Cortex™-M0+ Core
    • 48MHz, 4KB RAM, 32KB FLASH
    • SPI (1)
    • I2C (1)
    • UART (1)
    • PWM (8)
    • ADC (6)
    • DAC (1x 12bit)
    • Touch Sensor
    • GPIO (28)
  • FRDM-KL05Z Onboard Sensors
    • MMA8451Q - 3-axis accelerometer
    • Capacitive touch sensor
  • Evalution Form factor
    • 81mm x 53mm
    • 5V USB or 4.5-9V supply
    • Built-in USB drag 'n' drop FLASH programmer
  • mbed HDK & SDK enabled
    • Drag-n-drop programming
    • USB Serial Port
    • CMSIS-DAP
    • Online development tools
    • Easy to use C/C++ SDK
    • Lots of published libraries and projects
  • Status
    • Production




Where to buy

Online Distribution




Firmware

FirmwareUpdate

A new interface firmware image is necessary to mbed-enable NXP FRDM boards




Getting Started with mbed

1. Connect your microcontroller to a PC

Use the USB lead to connect your mbed to a PC. The status light will come on, indicating it has power. After a few seconds of activity, the PC will recognise the mbed Microcontroller as a standard USB drive.

/media/uploads/dan/winxp-disk.png/media/uploads/dan/mac-disk.png
Windows XP exampleMac OS X example

Go to the new USB Drive, and click MBED.HTM to open it in a web browser.

If you do not have an mbed account, choose "Signup", and create your mbed Account. Otherwise, log in with your normal username and password.

This will give you access to the website, tools, libraries and documentation.




PC Configuration

Your mbed Microcontroller can appear on your computer as a serial port. On Mac and Linux, this will happen by default. For Windows, you need to install a driver:

Windows

See Windows-serial-configuration for full details about setting up Windows for serial communication with your mbed Microcontroller

From a host PC to communicate with mbed you will need a terminal application. This allows the mbed Microcontroller to print to your PC screen, and for you to send characters back to your mbed.

  • Terminals - Using Terminal applications to communicate between the Host PC and the mbed Micrcontroller

Some terminal programs (e.g. TeraTerm) list the available serial ports by name. However, if you do need to know the identity of the serial port so that you can attach a terminal or an application to it:

'''Windows''''''Mac''''''Linux'''
Find the identity of the COM port by opening ''Device Manager''. To do this navigate ''Start -> Control Panel -> System -> Hardware -> Device Manager''.To find the device name under Mac OS X, use the command ''ls /dev/tty.usbmodem*''To find the device name under Linux, use the command ''ls /dev/ttyACM*''
windowsmaclinux




Downloading A program

1. Save a program binary (.bin) to the FRDM Platform

Download the appropriate "Hello World!" binary:

Note: the source code for this program will be seen in the next section.

Save the program binary file to your mbed Microcontroller Disk, just like you would with a normal USB disk. The Status LED will flash as the PC writes the file to the Microcontroller disk.

KL05Zstuff

2. Press the Reset Button

When the Reset Button in pressed, the newest program on the mbed Microcontroller Disk will be loaded in to the Microcontroller FLASH memory. The Status LED will flash as this happens.

When the program is has been loaded onto the microcontroller, it will then start it running.

3. Hello World!

The Microcontroller is now running the program; flashing LED1 forever! If you reset the Microcontroller, or disconnect and reconnect the power, the program will simply restart.

4. To download a different program

It is the newest program on the mbed Microcontroller that is run after reset. We can therefore download a new program or overwrite an existing one to update the program that will run.




Hello World!

Import programmbed_blinky

The example program for mbed pin-compatible platforms




Where Next

Follow the guide to creating your own programs using the online compiler




Technical Reference

Power

  • USB powered or 4.5v - 9v on Vin pin
  • Current (active): < _ _ _ mA
  • Current (sleep): < _ _ _ mA
  • 3.3v regulated output on VOUT to power peripherals
  • 5.0v from USB available on 5v (only available when USB is connected unless extra regulator is added!)
  • Digital IO pins are 3.3v, 4mA each, 400mA max total

Schematics

Data Sheets

Interface Firmware

 Buy Now