The Vodafone K3770 and K3772-Z modems allow you to connect your mbed to the internet from (almost) any location in the world.

The K3770/K3772-Z modems can be purchased directly from :

Many supermarkets and independent phone stores also sell these modems.

Hardware Setup

mbed Vodafone K3770/media/uploads/chris/vf-schematic.jpg

Because of the high current that the USB dongle requires, it is not possible to power it from the Vu pin on the mbed. In the example show, an external linear regulator board has been used to provide a high current regulated 5v supply from a 9v wall adaptor. The parts shown are :

Hello World

This example application uses the VodafoneUSBModem and the HTTPClient interface, enabling the mbed to fetch a URL over HTTP, and print the contents.

There are various other "hello world" programs that demonstrate SMS, NTP, Socket and Websocket interfaces, as well as management commands (check balance, link status, etc). See "Resources" section below.

You'll notice that this "Hello World" program is a little more complex that others, as we're using the mbed RTOS to manage the memory and processing resources/requirement of the USB Modem driver and the TCP/IP stack.

Import program

00001 #include "mbed.h"
00002 #include "VodafoneUSBModem.h"
00003 #include "HTTPClient.h"
00005 void test(void const*) 
00006 {
00007     VodafoneUSBModem modem;
00008     HTTPClient http;
00009     char str[512];
00011     int ret = modem.connect("pp.vodafone.co.uk");
00012     if(ret)
00013     {
00014       printf("Could not connect\n");
00015       return;
00016     }
00018     //GET data
00019     printf("Trying to fetch page...\n");
00020     ret = http.get("http://mbed.org/media/uploads/donatien/hello.txt", str, 128);
00021     if (!ret)
00022     {
00023       printf("Page fetched successfully - read %d characters\n", strlen(str));
00024       printf("Result: %s\n", str);
00025     }
00026     else
00027     {
00028       printf("Error - ret = %d - HTTP return code = %d\n", ret, http.getHTTPResponseCode());
00029     }
00031     //POST data
00032     HTTPMap map;
00033     HTTPText text(str, 512);
00034     map.put("Hello", "World");
00035     map.put("test", "1234");
00036     printf("Trying to post data...\n");
00037     ret = http.post("http://httpbin.org/post", map, &text);
00038     if (!ret)
00039     {
00040       printf("Executed POST successfully - read %d characters\n", strlen(str));
00041       printf("Result: %s\n", str);
00042     }
00043     else
00044     {
00045       printf("Error - ret = %d - HTTP return code = %d\n", ret, http.getHTTPResponseCode());
00046     }
00048     modem.disconnect();  
00050     while(1) {
00051     }
00052 }
00055 int main()
00056 {
00057   Thread testTask(test, NULL, osPriorityNormal, 1024 * 4);
00058   DigitalOut led(LED1);
00059   while(1)
00060   {
00061     led=!led;
00062     Thread::wait(1000);  
00063   }
00065   return 0;
00066 }


Import library

Public Member Functions

  VodafoneUSBModem (PinName powerGatingPin=NC, bool powerGatingOnWhenPinHigh=true)
  Create Vodafone USB Modem (K3770/K3772-Z) dongle API instance.
int  connect (const char *apn=NULL, const char *user=NULL, const char *password=NULL)
  Open a 3G internet connection.
int  disconnect ()
  Close the internet connection.
int  sendSM (const char *number, const char *message)
  Send a SM.
int  getSM (char *number, char *message, size_t maxLength)
  Receive a SM.
int  getSMCount (size_t *pCount)
  Get the number of SMs in the incoming box.
int  sendUSSD (const char *command, char *result, size_t maxLength)
  Send a USSD command & wait for its result.
int  getLinkState (int *pRssi, LinkMonitor::REGISTRATION_STATE *pRegistrationState, LinkMonitor::BEARER *pBearer)
  Get link state.
ATCommandsInterface getATCommandsInterface ()
  Get the ATCommandsInterface instance.
int  power (bool enable)
  Switch power on or off In order to use this function, a pin name must have been entered in the constructor.
char *  getIPAddress ()
  Get the IP address of a connected device.

Protected Member Functions

int  init ()
  Initialise dongle.
int  cleanup ()
  De-initialise dongle.

Resources and references

Network APN

To connect to the internet you must establish a PPP connection. You can then use BSD Sockets or any high-level component (HTTP Client, NTP Client).

To establish this connection, one single function is used:

int ret = modem.connect("pp.vodafone.co.uk");

pp.vodafone.co.uk is the APN value for a Vodafone Pay as you Go SIM. Change it to the relevant value if your SIM is different:

SIM TypeContract TypePlanAPNUserPassword
Mobile BroadbandPay as you go£5 for 250MB, lasting up to 30 dayssmartwebweb
Mobile BroadbandPay as you go£15 for 2GB, lasting up to 30 daysppbundle.internetwebweb
Mobile BroadbandPay as you go£15 for 1GB, lasting up to 90 dayspp.internetwebweb
Mobile BroadbandPay monthlyAnyinternetwebweb
PhonePay as you goAnypp.vodafone.co.ukwebweb
PhonePay monthlyAnyinternetwebweb

For details please check Vodafone's dedicated page.

The variable, "ret", allows you to check whether the connection was successful or not (0 on success, a negative value on error).

Please note that the "connect" command can take a few minutes to complete in worst case scenarios, as it initializes the modem and then waits for network registration.

Other Examples

Import programVodafoneUSBModemNTPClientTest

NTP Client Test with the Vodafone USB Modem library

Click here to the programs that are using the NTPClient

Import programVodafoneUSBModemSMSTest

SMS test with the Vodafone library

Import programVodafoneUSBModemWebsocketTest

Websocket client test with Vodafone USB Modems

Click here to the programs that are using the WebsocketClient

Import programVodafoneUSBModemUSSDTest

Test of USSD commands transmission over the Vodafone network with the Vodafone library

Discussion topics

TopicRepliesLast post
What about support for the E1550 Huawei USB Modem Stick? 1 13 Apr 2015 by Dmitry Pakhomenko