IQS622-EVAL-1

Low Cost Evaluation Board for Azoteq IQS622 Ultra Low Power (5uA) I2C Multi-Function Sensor with Light Sensor, Active (Reflective) IR, Touch and Hall Effect Sensor

Hello World

Import programIQS622_HelloWorld

Ultra Low Power (5uA) I2C Multi-Function Sensor with Light Sensor + Active (Reflective) IR + Touch + Hall Effect Sensor

Library

Import libraryIQS62x

Library to read and write Azoteq IQS6xx device registers via I2C.

Pinout

Datasheet

http://www.azoteq.com/evaluation-kits/iqs622ev01?mbed

Notes

Connecting IQS622 to mbed Hardware


/media/uploads/AzqDev/iqs622-c-connect-mbed-i2c-ultra-low-power-sensor-with-light-sensor-active-ir-capacitive-touch.gif

/media/uploads/AzqDev/iqs622-d-lpc1768-mbed-i2c-ultra-low-power-sensor-with-light-sensor-active-ir-capacitive-touch.gif
IQS622 Connected to mbed LPC1768 board.
The three green wires are SDA, SCL and RDY.
The red and black wires are GND and 3.3V.


Data Sheet & Eval Kit Information


http://www.azoteq.com/evaluation-kits/iqs622ev01?mbed

IQS622DisplayTerminal Library


Formatted Display of IQS622 registers on a serial terminal.

Import libraryIQS622DisplayTerminal

Register Display On Serial Terminal For Azoteq IQS622 Ultra Low Power (5uA) I2C Multi-Function Sensor with Light Sensor + Active (Reflective) IR + Touch + Hall Effect Sensor



You need to log in to post a discussion