Library to control the EM027BS013 ePaper display from Pervasive Display.
Dependents: app_epaper_EM027BS013_LPC1549 lpc4088_ebb_epaper EaEpaper_EM027BS013 app_epaper_EM027BS013 ... more
conf_EPD.h
00001 /** 00002 * \file 00003 * 00004 * \brief The EPD configurations 00005 * 00006 * Copyright (c) 2012-2014 Pervasive Displays Inc. All rights reserved. 00007 * 00008 * Authors: Pervasive Displays Inc. 00009 * 00010 * Redistribution and use in source and binary forms, with or without 00011 * modification, are permitted provided that the following conditions 00012 * are met: 00013 * 00014 * 1. Redistributions of source code must retain the above copyright 00015 * notice, this list of conditions and the following disclaimer. 00016 * 2. Redistributions in binary form must reproduce the above copyright 00017 * notice, this list of conditions and the following disclaimer in 00018 * the documentation and/or other materials provided with the 00019 * distribution. 00020 * 00021 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 00022 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 00023 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 00024 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 00025 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 00026 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 00027 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 00028 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 00029 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 00030 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 00031 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 00032 */ 00033 00034 #ifndef CONF_EPD_H_INCLUDED 00035 #define CONF_EPD_H_INCLUDED 00036 00037 /** Define EPD_KIT_TOOL_FUNCTIONS if the code will work with EPD Kit Tool. 00038 * \note Comment out the #define below if you won't work with EPD Kit tool and 00039 * just want to show two images change alternately by predefined image array. 00040 */ 00041 //#define EPD_KIT_TOOL_FUNCTIONS 00042 00043 /** \brief Supported COG version 00044 * 00045 * \note 00046 * - place the value here to assign which COG driving waveform will be used. 00047 * - Options are COG_V110_G1 and COG_V230_G2 */ 00048 //#define COG_V110_G1 00049 #define COG_V230_G2 00050 00051 /** The SPI frequency of this kit (8MHz) */ 00052 #define COG_SPI_baudrate 8000000 00053 00054 /** Define the number of ram buffer for system packet used interchangeably*/ 00055 #define BUFFER_SIZE 1 00056 00057 /** System Packet length=6~64, maximum=64. 00058 * The payload length of MSP430 LaunchPad is 32 bytes only. 00059 * ======================== 00060 * | Byte | Name | 00061 * |------|---------------| 00062 * | 0 | Packet Header | 00063 * | 1 | Packet Length | 00064 * | 2-3 | Kit ID | 00065 * | 4 | Command Type | 00066 * | 5-62 | Data | 00067 * | 63 | CRC | 00068 */ 00069 #define PAYLOAD_SIZE 32 00070 00071 /** Firmware version to display on EPD Kit Tool */ 00072 #define EPD_KIT_TOOL_VERSION "1.11 " 00073 00074 /** \brief Kit ID for recognizing by EPD Kit Tool 00075 * 00076 * \note 00077 * - High byte is IC vendor, low byte is the name of supported development kit 00078 * - Texas Instruments=01, MSP430 LaunchPad=01 */ 00079 #define EPD_KIT_TOOL_ID (uint16_t)0x0101 00080 00081 #endif /* CONF_EPD_H_INCLUDED */ 00082 00083 00084
Generated on Thu Jul 14 2022 17:10:35 by 1.7.2